Lotus 7 Clone D Modified SCCA
Started this 4 years ago. Should Be on the track this year. 1982 GSL 12A drivetrain.
http://www.locostusa.com/forums/down...2821&mode=view http://www.locostusa.com/forums/down...1567&mode=view http://www.locostusa.com/forums/down...1087&mode=view http://www.locostusa.com/forums/down...8813&mode=view |
Very nice. Looks fun.
|
Very nice! is it my imagination or is your engine set back, and if so how did you relocate the shifter? am putting a t2 engine in mine this summer and can move it back about 5" but will have to relocate the shifter forward the same amount and relocate the starter to the top of the bell housing. More pictures would be wonderful, see some really neat things on your build.
|
That's sweet bro lookin good!
|
I set the motor back as far as I could manage without doing a shifter mod. It works well in a "Book" chassis. Also shifted it about 6 inches to the passenger side for chassis balance and foot room.
...Mark |
Here are some pics showing the engine position mock up. You can seen the shifter is not too far back.
http://www.locostusa.com/forums/down...le.php?id=7641 http://www.locostusa.com/forums/down...le.php?id=9073 http://www.locostusa.com/forums/down...p?id=20680&t=1 |
Originally Posted by reo
(Post 11012781)
Very nice! is it my imagination or is your engine set back, and if so how did you relocate the shifter? am putting a t2 engine in mine this summer and can move it back about 5" but will have to relocate the shifter forward the same amount and relocate the starter to the top of the bell housing. More pictures would be wonderful, see some really neat things on your build.
...Mark |
Here is a better pic showing the starter location.
http://www.locostusa.com/forums/down...e.php?id=13627 |
More info can be found at my build log page here:
http://www.locostusa.com/forums/view...hp?f=35&t=3356 |
OK this is friken sweet, will follow.
|
Love the way you have thought about access for quick repairs. Mine is road only but these things are high maintenance due to light weight and sometimes hard usage. Would love to be able to quickly remove my cowl. Your firewall location gave me the false impression that the engine was further back than it is. Your design and workmanship are outstanding. bookmarked your build and will spend some time there later,
|
3 Attachment(s)
Updates. On track this year. Minor paint for the front end. Add some numbers and go!
|
Simpy Awesome!
Have fun with it! Regards, Crispy |
you have any sound clips? I would love to hear what that exhaust set up sounds like
|
|
Very nice build, congrats. Noticed on your test drive the car was idling a
little high or was I reading the tach wrong? |
Yes. Still playing with the carb. I'm running a 48 IDA with a pure stock 12A and custom header complete with 3" pre and main silencers. This is just a chassis development motor until my bridgeport race motor gets built. The idle jets are a bit rich. I only have them open 1/4 turn but it runs!:nod:
|
Video of First Track Day Event
Lots O Fun at the first track day. Got some tuning to do but it ran quick and smooth.
|
Epic! Im not a fan of the upside down wheel but whatever works for you! :)
|
|
Nice
|
What a build
|
First Autocross. Some tuning needed but it sure is fun!
|
Some pics of the "completed" machine.
http://www.locostusa.com/forums/view...163541#p163541 |
Some vids of the last few autocrosses. The RB presilencer and muffler work very well. The car sounds really good at idle and stays within sound limits at full song.
+1 cone in Chicago Clean run Camera B Fastest Index run on short course |
All times are GMT -5. The time now is 10:07 PM. |
© 2024 MH Sub I, LLC dba Internet Brands