|
going old skool got a repu:)
5 Attachment(s)
got this off a buddy it run's its in pretty good condition couple dent few minor problems i have the headlights grill and lower valance
thought ild share my ride is there many repu guys in this section https://www.rx7club.com/attachment.p...1&d=1179581781 https://www.rx7club.com/attachment.p...1&d=1179581781 https://www.rx7club.com/attachment.p...1&d=1179581888 https://www.rx7club.com/attachment.p...1&d=1179581888 https://www.rx7club.com/attachment.p...1&d=1179581888 |
nice... looks like it's practically complete... can i have your center dash panel ;)
|
How is the steering?
|
noice
|
Chris, I want those wheels. They are so close to what I have on the 2nd gen it's not even funny. Before you cut up the widebody you found, maybe you should see if someone will by it as a shell.
|
few things need to be fixed like the headlight wireing
can i use a 1st gen speedo cable?? but scott i wont those flare's on my car:) !!!!!! |
fixed the headlights well kinda i now have indicators in the front and back but the side lights arnt going
i now have headlights but only highbeams need to read throught the fsm for this one any one have ideas on the speedo cable? |
i bought a new speedo cable on ebay years ago. can't remember if it was for a b1600 or not. rx7........honestly never compared it. a good junkyard trip.
|
Don't you have a 1st gen cable laying around, maybe from the parts lot with the last 7 you bought
|
nah the cable was brittle and broken bit of a bummer
just waitin on the p.o to send me the socket for the lug nut then i can fix me breaks yay:) |
my boss has a blue 1. if i knew how to put the pics on here i could show ya
|
damn that repu is in very good over-all good condition..seems like everyone is finding repu's..good luck with the project!
|
speedo cable
there are new ones on ebay $20
http://cgi.ebay.com/ebaymotors/FORD-...spagenameZWD1V |
wow kool...........i got a yellow one....
|
help im trying to change my slaves on my drum brakes
which way am i supposed to turn the adjusters to losin the brakes i have turned them anti clockwise alot on both and the damn drum still wont come off... any pointers.. also on one i cant get a set screw out "can i just drill the screw out?? and not worry bout replacing it? |
the drums need to be pressed out with those screws, or if you can get a drum pulled from the local parts store it will have a slide hammer to get them off.
|
Repu
Congrats on your repu. I have a 75 repu which I am working on. It gets more looks than my brothers rx7. I think it great.
|
Originally Posted by Tom93R1
(Post 7172532)
the drums need to be pressed out with those screws, or if you can get a drum pulled from the local parts store it will have a slide hammer to get them off.
|
little update.
just purchaced this stuff from atkins. Overhaul Kit, 87-88 13B T (B) Overhaul Gasket Kit (8AF4-10-271) Apex Seals and Springs Corner Seals and Springs Side Seals and Springs Viton Oil O Rings (Inserts) Oil O Rings (Metal) Front and Rear Main Seals Pilot Bearing and Seal Thermal Pellet Hylomar Sealant Rotor Bearing For 69-92 Rotary Engines 3 Window Main Bearing for 74-92 RX7 All Rear Rotor Housing 87-88 RX7 Turbo Main Stationary Gear Bearing Tool to be used with a hydraulic press Rotor Bearing Tool. for use with Hydraulic Press Clutch Kit- NEW - 87-88 13B Turbo Rx7 Contains: Clutch Disc, Pressure Plate, Throwout Bearing, Pilot Bearing & Seal Oil Pump Chain for 86-95 All Rotary Engines CoolantTester Atkins Rotary Designed Coolant Pressure Tester Thermostat for 69-88 Rotary Engines Thermostat Gasket this stuff from japan2la on the froum Front and middle sideplate matched S4 TII rotors Spacer between TB and UIM FREE S5 Staygears front and rear (yes hardened) S4 TII BPS sensor been a longtime to get this far lol also heres my thread on my wireing nightmare https://www.rx7club.com/1st-generation-specific-1979-1985-18/s4-t2-wireing-project-830144/ cheers kiwi |
5 Attachment(s)
atkins corner seals the indentation faces the iron.
https://www.rx7club.com/attachment.p...1&d=1239671754 new stuff :) https://www.rx7club.com/attachment.p...1&d=1239671754 stock t2 clutch and pp https://www.rx7club.com/attachment.p...1&d=1239671754 close up of one of the new housings https://www.rx7club.com/attachment.p...1&d=1239671754 scored a shitload of tools for next to nothing all good brands snapon,mag etc https://www.rx7club.com/attachment.p...1&d=1239671754 |
Nice score on the tools!!!
|
congrats!!!!!
|
Sweet another local guy with a REPU. I have thought about getting one for a while now.
I look forward to seeing it on the road. |
yeah i cant wait. slowly but surley i will get it running.
where in oregon are you? thanks guys getting my parts tomorro from japan2la cant wait. also i fould i have tiny tiny pitting in one area of the e-shaft. has any one had there shaft polished at a machine shop.?i know pistons cranks are a lil different since the rods can be cut down. but can i do this and stay within oil clearances? |
Originally Posted by blwfly
(Post 6956391)
is there many repu guys in this section
I've been trying for over a year now to find one in even semi-decent condition here in the Northeast. Yours is espically clean. Good find! |
| All times are GMT -5. The time now is 07:13 AM. |
© 2024 MH Sub I, LLC dba Internet Brands