going old skool got a repu:)
#204
Bluetooth adapter from there website http://digitaltuning.com/index.php?p...age=2&ecu=S4T2
styletap palm emulator app
styletap palm emulator app
Last edited by blwfly; 10-17-15 at 12:39 AM.
#207
Been a longtime since i have updated lots of random stuff done.
At this moment i just have to finish waste-gate dump and hook up oil supply/drain and a few other small items.
The weather here in Oregon has turned to s#@t and i only get to work on my truck for 45min each night which is the major reason i am a slow progress-er.
I will defintaly post videos of startup and a small drive if it doesn't blow up in the near future.
cheers
chris reinhard.
couple fans installed
intercooler mounted /test fit
bluetooth to rtek working on a old android
borgwarner s300 177272
deciding pipe routing
drilled hole with 4" hole saw
had to notch the bumper supports for pipes
At this moment i just have to finish waste-gate dump and hook up oil supply/drain and a few other small items.
The weather here in Oregon has turned to s#@t and i only get to work on my truck for 45min each night which is the major reason i am a slow progress-er.
I will defintaly post videos of startup and a small drive if it doesn't blow up in the near future.
cheers
chris reinhard.
couple fans installed
intercooler mounted /test fit
bluetooth to rtek working on a old android
borgwarner s300 177272
deciding pipe routing
drilled hole with 4" hole saw
had to notch the bumper supports for pipes
Last edited by blwfly; 10-22-17 at 01:09 PM.
#210
Senior Member
iTrader: (1)
extension for the wastegate
Attachment 729975
This is a cheap cx racing manifold i will upgrade later to something more functional i wouldn't recommend it to anyone the tubing is to large, wastegate tubes are terrible i spent maybe 2 hours grinding the poor transitions inside.
Attachment 729975
This is a cheap cx racing manifold i will upgrade later to something more functional i wouldn't recommend it to anyone the tubing is to large, wastegate tubes are terrible i spent maybe 2 hours grinding the poor transitions inside.
is it the manifold for an fc that fits?
#213
I needed to figure out a way to tap the front cover for the turbo oil drain.
I did not want to remove the engine since autumn is here which means it is always raining.
I came up with an idea to make my own extended tap tool by using a 24" 1/2" socket extension a 1/2npt tap and some 3/8 bar.
tap tool
tap tool in action
-10 an fitting inplace
I did not want to remove the engine since autumn is here which means it is always raining.
I came up with an idea to make my own extended tap tool by using a 24" 1/2" socket extension a 1/2npt tap and some 3/8 bar.
tap tool
tap tool in action
-10 an fitting inplace
#222
www.discgolforegon.com
iTrader: (4)
Join Date: Mar 2008
Location: tha burg
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
Hey!! Do you happen to live in the Oakland/ rice hill area?
my buddy claims he has seen it driving around. I live in Oakland and just bought a repu. Putting my pineapple 13bt in it. Would love to check yours out in person. Sometime!! Hmu
my buddy claims he has seen it driving around. I live in Oakland and just bought a repu. Putting my pineapple 13bt in it. Would love to check yours out in person. Sometime!! Hmu
The following users liked this post:
blwfly (01-13-18)