Engine Heading out for Build
No one probably remembers me. It's been about 3 years, maybe, since I blew my engine. Any ways it's heading down to Pineapple as i type this. Looking at a 500hp engine build. This will include a large street port, s5 rear plate, new housings (included), and Pineapple stage 3 oil mod.
As for style, the housings a vista blue with a carbon fiber finish on top. Stage 3 Turbo needs to be rebuilt, luckily the turbine is still in tact. Has a lot of shaft play so it will be sent to BNR. Thinking about upgrading to stage 4 but might hold off for now. Haltech E6X so i don't risk anything. Supporting mods from there like fuel, etc... Hope to have it up and running before spring if not sooner. |
See, i knew no one remember me, lol.
|
Ha Ha, I remember you "Wally Blow Chunks"
Sounds like its going to be a litttle monster, going in the T2? |
Wow its been a while, what let go last time?
|
Yes, lol, I'm the name Kettleman gave me.
Looking forward to the car running again. It's about time as well a deserved treat. Yes, the engine will be going into the T2. I would never give it up. I've put so much money into it, for instance the custom v-mount, that it wouldn't be worth selling. Pushing more than ever now since I've been seeing a 10A White 88 running around Bellevue. Overall missing the scene especially since all my friends drive modified Subaru's, lol. To Spyder, the rear rotor lost compression. Usually it's the cause for s4 motors. I tried MMO thinking something would loosen but nothing. Had a forum member come out to confirm its gone. Weird enough it still ran and sounded fine. Just had no power whatsoever. I blame my v-mount with poor supporting ventilation mods. I had no reserve hood or duct work. :( |
same damn deal happened with my buddies s4 vert. sounded and ran fine. just tached out but didnt really move anywhere anytime fast
|
Originally Posted by WallyHojo
(Post 9529198)
See, i knew no one remember me, lol.
and good to see your still around wally |
I remember you too.
There's a local guy with a compression tester? Tits. Send me their name so I can have mine tested when she's running again. Need to throw the rear end in. I wanna see your custom V mount. I need to do this to get rid of the retarded custom aluminum hood scoop I have... Yeah, don't ask. |
lol back from the dead man you need to come out to one of the deltaco/rock7 meets! its been ages!
|
Engine update...it's ready to go in the car. Sent out my turbo for rebuild and upgrade. Next i'm looking for a fc trailing coil for the banzai racing pfc and dual fuel pump mod.
|
congrats, you still living in Bellevue ? I could use a hand when i start building mine soon :)
|
I had pineapple rebuild my t2 stage 3 oil passages,large port ect. Very nice engine I hope for 400whp as well.
|
Originally Posted by notveryhappyjack
(Post 10626006)
congrats, you still living in Bellevue ? I could use a hand when i start building mine soon :)
Originally Posted by TOOSHORT_88
(Post 10626059)
I had pineapple rebuild my t2 stage 3 oil passages,large port ect. Very nice engine I hope for 400whp as well.
|
All times are GMT -5. The time now is 07:04 PM. |
© 2024 MH Sub I, LLC dba Internet Brands