M2 style aluminum intake box
 

Aluminum M2 style intake box with KN filters.  Not sure which exact brand or who made it, came with a project car.  Will allow fitment of much larger intercoolers such as the large Pettit Racing.

$250 shipped.

Pictures showing the extra clearance for the upper radiator hose. Compared to a CF M2. Some radiators put the upper hose at an angle, thus the required notch on these airboxes.

https://cimg8.ibsrv.net/gimg/www.rx7...fa3ac3380e.jpg
https://cimg7.ibsrv.net/gimg/www.rx7...4ac90b9a44.jpg

It looks a lot like a modified CX Racing intake. Do you have any of the hard pipes? The CX Racing kit had a hard pipe that connected to the turbo.

https://www.cxracing.com/AI-13B-STOCK-FD-AIRBOX

It's definitely different compared to the cx box. Look at the shape of the top cover etc... No pipes, just the airbox.

Some questions on intake piping. The stock secondary intake hose fits perfect. The primary intake fits perfect with an aftermarket solution such as a silicon coupler or a trust rubber elbow which I will include. The trust elbow requires you to remove the two bushings from the stock elbow and transfer them over. See attached picture.

part #
N3A1-13-249
N3A1-13-247

https://cimg1.ibsrv.net/gimg/www.rx7...26ce077a05.png

Hello, I’m interested in the intake for my PFS intercooler. I bought it without duct/intake so this would be nice to have. I’ve been a member for about a year but haven’t been active so not sure if I can pm you yet.