RX7Club.com - Mazda RX7 Forum - 99-00 ABS Pump, ABS ECU, ABS Wiring Harness, JDM Chassis Harness

As close to plug and play as possible for much updated ABS. Sold one of these a decade ago and never got around to installing this one :lol:

These updated pumps have 6 solenoids with much improved algorithms. If you do some research you will immediately see how having an input and output solenoid on each channel GREATLY improves ABS performance. Say goodbye to the slow pulsing of the stock ABS system. Some have said that all FD ABS systems from 99-2002 have Electronic Brake Force distribution. If this is correct, EBD alone is well worth the small fab work required to set this up. Documentation on the net gives mixed info rather or not the 99-00 have EBD or if it's only the 01-02 pumps.

By having the JDM harnesses you can essentially leave the stock wiring intact incase you ever wanted to go back to stock. According the another member only a few wires on the USDM engine bay connector need to be switched around within the connector. See thread: https://www.rx7club.com/showthread.p...hlight=jdm+abs

1999-2000 F133-43-7A0 ABS pump
ABS ECU F132-67-650
ABS harness
JDM 99-00 chassis harness.

You will need to:
-Separate out the JDM ABS wiring and integrate into the USDM wiring harness.
-Fabricate an ABS mount

$1250 shipped.