RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   New Member RX-7 Technical (https://www.rx7club.com/new-member-rx-7-technical-256/)
-   -   TII engine mod question (https://www.rx7club.com/new-member-rx-7-technical-256/tii-engine-mod-question-1016499/)

Montanrchy 11-01-12 03:13 AM

TII engine mod question
 
I have recently aquired an 87 TII and was wondering what mods i can do to raise the power(after 60k tuneup of course) and not have to tune it? I have tried searching and couldnt find anything. I also remember reading that the factory top mount can only hande 300-350hp?? before heat soaking and that the ecu will cut fuel after 8.5 psi. My thoughts were to get a walbro 255, electronic boost controller, raise boost to 10psi(factory turbo limits are 12-14??) intake and full exhaust.

What kind of power gains would I be looking at?

Anything else i should do to assist the process?

Any help and criticism is welcome with open arms (:

-Trey

Schnuh330 11-01-12 07:58 AM

Fc3spro.com has a page that details mod stages and hp gains expected
FC3S Pro v2.0: From Mild 2 Wild - Power
Hope this helps

Evil Aviator 11-01-12 06:20 PM

See the link posted above. If you click on the Site Map you will also see more info on basic mods and repairs. Your boost questions should be answered on that site.

Two low-budget mods that are not mentioned on that website are the Rtek ECUs and BNR hybrid turbos. These are common bolt-on mods for those who don't want to spend a lot of time and money on their cars.
Rtek7 ECU Upgrade Detailed Information
BNR Supercars - Bryan Nickell's Rotary Supercars - Mazda RX-7 2nd Generation (1987-1991)

There is no such thing as a hp limit for an intercooler. However, yes, you would probably want a front-mounted air-air intercooler if your engine is built for a lot of horsepower. This is because the stock intercooler is designed for low pressure loss and quick response, which is more suited to a peppy street setup as the car came from the factory. A higher-boosted engine is usually better off with an intercooler that is designed for high airflow and maximum heat rejection, even though this will hurt response and incur a larger pressure drop. Another option is Anti-Detonant Injection (usually called "Auxiliary Injection" or "AI" on the internet).

Montanrchy 11-02-12 12:45 AM

Thanks this helps alot! (:

Montanrchy 11-02-12 12:54 AM

Another thing though, was i right about what the stock psi limits for the s4 tII turbo are?

Evil Aviator 11-02-12 05:00 PM


Originally Posted by Montanrchy (Post 11274241)
Another thing though, was i right about what the stock psi limits for the s4 tII turbo are?

Yes, that is generally correct, as you can see by the recommended boost levels on the FC3S Pro website. However, this will vary slightly with the condition of the turbo, engine, fuel, and the ambient weather conditions. You should take all internet forum numbers as a general guideline rather than an absolute number.

Montanrchy 11-03-12 02:48 AM

Alright, thanks!


All times are GMT -5. The time now is 06:55 PM.


© 2024 MH Sub I, LLC dba Internet Brands