stock security system problems?
 

so alittle history on my car, bought it 4 months ago it is a 87 gxl with 138k miles runs great never had to do anything to the car besides change oil, and new spark plugs and wires. i recently replaced the driverside door from a 90s parts car a friend had and it was power locks but mine wasnt. switched over the door harness so it would fit the dash harness and i cut the wires for the power locks thinking it wouldnt matter, well it tripped the security system and completely shut down my car, no radio no start at all not even clicking, so i jumped the starter relay so i can drive it but i still have no radio. what can i do to bypass the stock security system??? thanks guys i just need this to be fixed

S5s only had power locks on the passenger side, and there was some sort of switch to trigger it from the driver's side. There are/were some aftermarket conversion kits available too. Are you sure what you cut was power lock related and not for the lock sensor used by the alarm? Check wire colors listed in the S5 diagrams. Here's a link if you need one: http://foxed.ca/foxed/index.php?page...nual#secondgen.

it was probably the lock sensor, the wires were attatched to the door handle itself and just not thinking i cut them. what does this do actually? i miss my stereo and need to figure it out

The simplest solution would be to get part of your S4 lock assembly, reattach the wires that you cut off, and put it all in the S5 door. The alarm system needs to know what position the locks are in so it knows if a break-in has occurred.

i did that reattatched all the wires to the correct ones that had been cut. pulled the power cable off the battery for 1 min to reset any codes, didnt do anything, unplugged the ecu didnt do anything. im just lost for what do do. ill see if i can get another door wiring harness and see what that does