RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   New Member RX-7 Technical (https://www.rx7club.com/new-member-rx-7-technical-256/)
-   -   Sprint RE base map (https://www.rx7club.com/new-member-rx-7-technical-256/sprint-re-base-map-1061218/)

Trebol 04-08-14 02:31 PM

Sprint RE base map
 
I'm looking for a base map to get my car started. I have a S5 bridgeported with 720 primaries and 1000 secondaries, walbro 255 fuel pump, stock coils and using internal map. Any help will be appreciated.

misterstyx69 04-08-14 05:27 PM

If you kindly go back and read the threads on RULES(Top of Intro section),you can gain some posts and access the Haltech section of this Forum.
You can search or ask questions that will help you further in that section.
This section is like a big mixed bag of stuff for beginners.Your setup is a little more advanced,.
good luck.

Trebol 04-08-14 06:11 PM


Originally Posted by misterstyx69 (Post 11714795)
If you kindly go back and read the threads on RULES(Top of Intro section),you can gain some posts and access the Haltech section of this Forum.
You can search or ask questions that will help you further in that section.
This section is like a big mixed bag of stuff for beginners.Your setup is a little more advanced,.
good luck.

Thank you for the advice.

Evil Aviator 04-08-14 08:47 PM

It comes from the factory with a base map and setup instructions. Did you not buy it new?

Anyway, here is a link to the quick start guide:
http://www.haltech.com/wp-content/up...se_website.pdf

Sorry, but you can't just list the mods on your engine and have somebody on the internet magically produce a map that will work with your car because all engines are different even if they have the same components. Also, I have seen some really scary EMS maps on the internet, and I wouldn't want to put them in my ECU any more than I would want to share needles with a junkie.

If this is beyond your ability, then you will need to have a professional tune your car. It's OK to admit that you are a normal person who is over his head with such a complicated project.

misterstyx69 04-08-14 09:29 PM

/\/\...ya can be normal..but we just can't all be "Evil"..haha!..(only ONE here.!)

Trebol 04-09-14 02:08 PM


Originally Posted by Evil Aviator (Post 11714911)
It comes from the factory with a base map and setup instructions. Did you not buy it new?

Anyway, here is a link to the quick start guide:
http://www.haltech.com/wp-content/up...se_website.pdf

Sorry, but you can't just list the mods on your engine and have somebody on the internet magically produce a map that will work with your car because all engines are different even if they have the same components. Also, I have seen some really scary EMS maps on the internet, and I wouldn't want to put them in my ECU any more than I would want to share needles with a junkie.

If this is beyond your ability, then you will need to have a professional tune your car. It's OK to admit that you are a normal person who is over his head with such a complicated project.

Thanks for the link and the warm welcome.

Evil Aviator 04-09-14 08:09 PM


Originally Posted by misterstyx69 (Post 11714939)
/\/\...ya can be normal..but we just can't all be "Evil"..haha!..(only ONE here.!)

Muhahaha!

Yes, I have pretty much accepted the fact that noobs are going to get butt-hurt when they hear the truth. However, I figure that it is a hell of a lot better than letting them waste thousands of dollars and months of work on mistakes because nobody was willing to point them in the right direction for fear of hurting their ego.

The OP did not mention whether the Haltech was purchased new or used, but if it was new then somebody should kick the vendor in the balls for not supporting his product. A good vendor like Ludwig would not leave a customer hanging in the breeze like this. Hopefully it was purchased used and the OP simply underestimated the complexity.

Sgtblue 04-09-14 08:30 PM

Well..I worked major cases for over a decade, picking up skills like ID'ing gender, age and race from skeletal remains. But I can't tune a car any better than Bill Clinton could pass up an Arkansas strip joint. So let me be the first to admit I'm a 'normal' person in this thread. ;)

Evil Aviator 04-09-14 09:34 PM


Originally Posted by Sgtblue (Post 11715590)
Well..I worked major cases for over a decade, picking up skills like ID'ing gender, age and race from skeletal remains. But I can't tune a car any better than Bill Clinton could pass up an Arkansas strip joint. So let me be the first to admit I'm a 'normal' person in this thread. ;)

LOL, good one.

I am not normal. OK, I guess I walked into that one. But seriously, I have many years of education and experience with internal combustion engines, power management, and performance analysis, I worked for NASA, I'm a member of SAE, and I still need help setting up a standalone EMS. In fact, most of the really cool stuff on my car was built by somebody else because I fully admit that I am incompetent. That's OK though, because I am content with being just plain Evil.

misterstyx69 04-09-14 10:19 PM

Ok..I admit it.
I'm Freakin nuts...but in a good way..
my 25 other personalities may not agree,but If they Sign Up I can just ban them.. meh-hahaha..

sorry.."muhahaha" is the property of EVIL..copyright 2014..So I could not use it.

Evil Aviator 04-10-14 08:46 PM


Originally Posted by misterstyx69 (Post 11715665)
sorry.."muhahaha" is the property of EVIL..copyright 2014..So I could not use it.

Oh good, I really didn't want you using "muhahaha". However, I don't mind if the other 24 of you use it. No offense, but I need to limit the use of my property, and the cutoff has to be at some point, so I selected two dozen as the limit. Check with RETed to see if he will give you a license for "no", and that should work just as well, if not better.

misterstyx69 04-10-14 10:26 PM

I just got permission to use "la-la-la..I can't hear you!"
The alternative is: "I'm not touching you". while waving my finger in your face..BUT you gotta be physically close for that so no good for internet usage.
(TREBOL must think we are all Freakin nuts now..lol!)

Evil Aviator 04-12-14 01:52 AM


Originally Posted by misterstyx69 (Post 11716307)
I just got permission to use "la-la-la..I can't hear you!"
The alternative is: "I'm not touching you". while waving my finger in your face..BUT you gotta be physically close for that so no good for internet usage.

So are you dumping all of your Marvin the Martian quotes, or are you keeping those too?


Originally Posted by misterstyx69 (Post 11716307)
(TREBOL must think we are all Freakin nuts now..lol!)

I'm the only sane person on this forum. The rest of you guys are Kookoo for Cocoa Puffs. My dog even told me so last week when we were eating dinner with Jesus at my Yeti ice fortress.

misterstyx69 04-12-14 05:36 AM

I sent my poodle to hair straightening school..
SPIKE is doing fine.
(what do you expect for 6:30 in morning)


All times are GMT -5. The time now is 11:05 PM.


© 2024 MH Sub I, LLC dba Internet Brands