Sprint RE base map
04-08-14, 02:31 PM
#1
Junior Member
Thread Starter
Join Date: Apr 2014
Location: Clarksville TN
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Sprint RE base map
I'm looking for a base map to get my car started. I have a S5 bridgeported with 720 primaries and 1000 secondaries, walbro 255 fuel pump, stock coils and using internal map. Any help will be appreciated.
04-08-14, 05:27 PM
#2
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
If you kindly go back and read the threads on RULES(Top of Intro section),you can gain some posts and access the Haltech section of this Forum.
You can search or ask questions that will help you further in that section.
This section is like a big mixed bag of stuff for beginners.Your setup is a little more advanced,.
good luck.
You can search or ask questions that will help you further in that section.
This section is like a big mixed bag of stuff for beginners.Your setup is a little more advanced,.
good luck.
04-08-14, 06:11 PM
#3
Junior Member
Thread Starter
Join Date: Apr 2014
Location: Clarksville TN
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
If you kindly go back and read the threads on RULES(Top of Intro section),you can gain some posts and access the Haltech section of this Forum.
You can search or ask questions that will help you further in that section.
This section is like a big mixed bag of stuff for beginners.Your setup is a little more advanced,.
good luck.
You can search or ask questions that will help you further in that section.
This section is like a big mixed bag of stuff for beginners.Your setup is a little more advanced,.
good luck.
04-08-14, 08:47 PM
#4
Rotorhead
Join Date: Feb 2001
Location: Charlottesville, Virginia, USA
Posts: 9,136
Likes: 0
Received 39 Likes
on
33 Posts
It comes from the factory with a base map and setup instructions. Did you not buy it new?
Anyway, here is a link to the quick start guide:
http://www.haltech.com/wp-content/up...se_website.pdf
Sorry, but you can't just list the mods on your engine and have somebody on the internet magically produce a map that will work with your car because all engines are different even if they have the same components. Also, I have seen some really scary EMS maps on the internet, and I wouldn't want to put them in my ECU any more than I would want to share needles with a junkie.
If this is beyond your ability, then you will need to have a professional tune your car. It's OK to admit that you are a normal person who is over his head with such a complicated project.
Anyway, here is a link to the quick start guide:
http://www.haltech.com/wp-content/up...se_website.pdf
Sorry, but you can't just list the mods on your engine and have somebody on the internet magically produce a map that will work with your car because all engines are different even if they have the same components. Also, I have seen some really scary EMS maps on the internet, and I wouldn't want to put them in my ECU any more than I would want to share needles with a junkie.
If this is beyond your ability, then you will need to have a professional tune your car. It's OK to admit that you are a normal person who is over his head with such a complicated project.
04-09-14, 02:08 PM
#6
Junior Member
Thread Starter
Join Date: Apr 2014
Location: Clarksville TN
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
It comes from the factory with a base map and setup instructions. Did you not buy it new?
Anyway, here is a link to the quick start guide:
http://www.haltech.com/wp-content/up...se_website.pdf
Sorry, but you can't just list the mods on your engine and have somebody on the internet magically produce a map that will work with your car because all engines are different even if they have the same components. Also, I have seen some really scary EMS maps on the internet, and I wouldn't want to put them in my ECU any more than I would want to share needles with a junkie.
If this is beyond your ability, then you will need to have a professional tune your car. It's OK to admit that you are a normal person who is over his head with such a complicated project.
Anyway, here is a link to the quick start guide:
http://www.haltech.com/wp-content/up...se_website.pdf
Sorry, but you can't just list the mods on your engine and have somebody on the internet magically produce a map that will work with your car because all engines are different even if they have the same components. Also, I have seen some really scary EMS maps on the internet, and I wouldn't want to put them in my ECU any more than I would want to share needles with a junkie.
If this is beyond your ability, then you will need to have a professional tune your car. It's OK to admit that you are a normal person who is over his head with such a complicated project.
04-09-14, 08:09 PM
#7
Rotorhead
Join Date: Feb 2001
Location: Charlottesville, Virginia, USA
Posts: 9,136
Likes: 0
Received 39 Likes
on
33 Posts
Yes, I have pretty much accepted the fact that noobs are going to get butt-hurt when they hear the truth. However, I figure that it is a hell of a lot better than letting them waste thousands of dollars and months of work on mistakes because nobody was willing to point them in the right direction for fear of hurting their ego.
The OP did not mention whether the Haltech was purchased new or used, but if it was new then somebody should kick the vendor in the ***** for not supporting his product. A good vendor like Ludwig would not leave a customer hanging in the breeze like this. Hopefully it was purchased used and the OP simply underestimated the complexity.
Trending Topics
04-09-14, 08:30 PM
#8
Well..I worked major cases for over a decade, picking up skills like ID'ing gender, age and race from skeletal remains. But I can't tune a car any better than Bill Clinton could pass up an Arkansas strip joint. So let me be the first to admit I'm a 'normal' person in this thread. 
04-09-14, 09:34 PM
#9
Rotorhead
Join Date: Feb 2001
Location: Charlottesville, Virginia, USA
Posts: 9,136
Likes: 0
Received 39 Likes
on
33 Posts
Well..I worked major cases for over a decade, picking up skills like ID'ing gender, age and race from skeletal remains. But I can't tune a car any better than Bill Clinton could pass up an Arkansas strip joint. So let me be the first to admit I'm a 'normal' person in this thread.
I am not normal. OK, I guess I walked into that one. But seriously, I have many years of education and experience with internal combustion engines, power management, and performance analysis, I worked for NASA, I'm a member of SAE, and I still need help setting up a standalone EMS. In fact, most of the really cool stuff on my car was built by somebody else because I fully admit that I am incompetent. That's OK though, because I am content with being just plain Evil.
04-09-14, 10:19 PM
#10
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
Ok..I admit it.
I'm Freakin nuts...but in a good way..
my 25 other personalities may not agree,but If they Sign Up I can just ban them.. meh-hahaha..
sorry.."muhahaha" is the property of EVIL..copyright 2014..So I could not use it.
I'm Freakin nuts...but in a good way..
my 25 other personalities may not agree,but If they Sign Up I can just ban them.. meh-hahaha..
sorry.."muhahaha" is the property of EVIL..copyright 2014..So I could not use it.
Last edited by misterstyx69; 04-09-14 at 10:24 PM.
04-10-14, 08:46 PM
#11
Rotorhead
Join Date: Feb 2001
Location: Charlottesville, Virginia, USA
Posts: 9,136
Likes: 0
Received 39 Likes
on
33 Posts
Oh good, I really didn't want you using "muhahaha". However, I don't mind if the other 24 of you use it. No offense, but I need to limit the use of my property, and the cutoff has to be at some point, so I selected two dozen as the limit. Check with RETed to see if he will give you a license for "no", and that should work just as well, if not better.
04-10-14, 10:26 PM
#12
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
I just got permission to use "la-la-la..I can't hear you!"
The alternative is: "I'm not touching you". while waving my finger in your face..BUT you gotta be physically close for that so no good for internet usage.
(TREBOL must think we are all Freakin nuts now..lol!)
The alternative is: "I'm not touching you". while waving my finger in your face..BUT you gotta be physically close for that so no good for internet usage.
(TREBOL must think we are all Freakin nuts now..lol!)
04-12-14, 01:52 AM
#13
Rotorhead
Join Date: Feb 2001
Location: Charlottesville, Virginia, USA
Posts: 9,136
Likes: 0
Received 39 Likes
on
33 Posts
I'm the only sane person on this forum. The rest of you guys are Kookoo for Cocoa Puffs. My dog even told me so last week when we were eating dinner with Jesus at my Yeti ice fortress.
Thread
Thread Starter
Forum
Replies
Last Post
killerrx710
Adaptronic Engine Mgmt - AUS
5
09-28-15 09:13 AM
killerrx710
2nd Generation Specific (1986-1992)
1
09-24-15 10:57 PM
