Pfc tunung
 

Hi all,I need to start the engine but for a reason the settings are back on a base map setting, any one can help or just send me a setting or somthing?And what is the size of injectors I can run on PFC?
THANKS

Engine specs
semi bridgeport
injection 550cc primary
1000cc secondary
Turbo Garrett gt42

If it's a base map it's likely not the PFC keeping it from starting.

unless he has a different map sensor, that'd throw things off a ways.

there used to be some base maps in the PFC section stickies but those hosting sites probably all dried up.

So basically i can start the engine whit stock map even if i have the injectors bigger than stock ones? And another question whit PFC what are the biggest injectors that i can use

you're starting the car on the 550's, which are stock.

Yes I now but I need more power so I need bigger injectors,

But if your car won't start, that's not the reason.

So basically i can start the engine on base map?

The reason that I am asking about the injectors because i need to now which they are the biggest that can support the ecu (PFC)

Yes

Thanks mate,about the injectors question you can help in future I need to upgrade in fuel-efficient

you can use 850 primaries and up to 2000 secondaries with the PFC with some skilled tuning and quality parts.

I have some specs on top of the treat

Your car should start with a base map since you're still using stock primary injectors. But if you have an aftermarkey map sensor that could cause it not to start

The map sensor is stock one,maybe is faulty? If I check on the comander what is the right value?