oil cooler!
#1
JC COSMO
Thread Starter
Join Date: Jan 2018
Location: Quebec
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
oil cooler!
hey guys! currently in the midst of getting all the parts to swap the 13b-rew in my cosmo an a buddy of mine gave me a set of rx8 dual oil coolers. Now, I wanted to know if I could use them on my 94 13b-rew since I believe the thermostat temperatures arnt the same
cheers
alex
cheers
alex
#2
Can Post Only in New Member Section
It has been done before, I've seen it on an FD once, but the lines can be a pain and also the mechanical OMP needs to tuned for it obv so the oil pressure doesn't take a ****. Hope that helped!
#3
JC COSMO
Thread Starter
Join Date: Jan 2018
Location: Quebec
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
@Roach but isn't the omp on the FD electronic? Anyways, i'm gonna run full premix and delete the omp! and what do you mean when you say the lines are a pain ?
thanks!
thanks!
#4
Urban Combat Vet
iTrader: (16)
*Yes, the FD OMP is electronic... load and rpm dependent thru the ECU.
*In any case I’m not seeing what the OMP has to do with oil coolers.
*Because the FD OMP is partly rpm dependent and premixing is dependent only on injector duty, there is a growing number of owners who premix at a reduced rate WITH an OMP. You might want to search.
*This is all I could find on using RX8 coolers with the 13b REW...
https://www.rx7club.com/3rd-generati...ers-fd-639218/
*In any case I’m not seeing what the OMP has to do with oil coolers.
*Because the FD OMP is partly rpm dependent and premixing is dependent only on injector duty, there is a growing number of owners who premix at a reduced rate WITH an OMP. You might want to search.
*This is all I could find on using RX8 coolers with the 13b REW...
https://www.rx7club.com/3rd-generati...ers-fd-639218/
Last edited by Sgtblue; 01-17-18 at 09:54 AM.
#5
JC COSMO
Thread Starter
Join Date: Jan 2018
Location: Quebec
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
*Yes, the FD OMP is electronic... load and rpm dependent thru the ECU.
*In any case I’m not seeing what the OMP has to do with oil coolers.
*Because the FD OMP is partly rpm dependent and premixing is dependent only on injector duty, there is a growing number of owners who premix at a reduced rate WITH an OMP. You might want to search.
*This is all I could find on using RX8 coolers with the 13b REW...
https://www.rx7club.com/3rd-generati...ers-fd-639218/
*In any case I’m not seeing what the OMP has to do with oil coolers.
*Because the FD OMP is partly rpm dependent and premixing is dependent only on injector duty, there is a growing number of owners who premix at a reduced rate WITH an OMP. You might want to search.
*This is all I could find on using RX8 coolers with the 13b REW...
https://www.rx7club.com/3rd-generati...ers-fd-639218/
Thread
Thread Starter
Forum
Replies
Last Post
AZrx7
1st Generation Specific (1979-1985)
5
07-08-02 06:18 PM
WackyRotary
1st Generation Specific (1979-1985)
9
03-06-02 11:52 AM