no spark, coils arent getting any power
just swapped in a s4 n/a motor and tranny, while trying to start the engine it cranks but doesn't turn over. while checking the leading and trailing coil power wires, my volt meter showed there was no power going to the coils.ive checked the main relay and grounds everythings seems to be good, am i missing something here?
|
no spark, coils arent getting any power
By "checked the main relay", do you mean you verified its clicking to activate, or you verified its inputs/outputs with a multimeter? Have you checked the fusing in the bay fusebox?
|
checked its inputs, and no, ive realized this morning ive overlooked a couple things, like grounding and checking the fuse boxes, i assumed since i snagged everything from the running donor car(chasis&ecu harness) that everything would still work, when it stops raining im going to check the fuses, Btw I am a newb to the rotary motor/scene and im using this car to learn, only problem with work and school its taken to long and will need it running by next week
|
Need help! checked all fuses and changed them, still nothing
|
If the main relay were working properly w/key to on then the Black/White wire and the Black/Yellow wire coming from it would have 12 volts each. Near the lead coil is a Green check connector w/4 wires and one of them is the B/W wire from the main relay. The B/Y wire can be found at any of the injectors.
|
fixed the problem thanks!
|
no spark, coils arent getting any power
Originally Posted by Rxchino
fixed the problem thanks!
|
overlooked a loose relay so i bolted that down and i grounded the alternator to the shock tower.
|
All times are GMT -5. The time now is 08:10 AM. |
© 2024 MH Sub I, LLC dba Internet Brands