RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   New Member RX-7 Technical (https://www.rx7club.com/new-member-rx-7-technical-256/)
-   -   Need info on future build (https://www.rx7club.com/new-member-rx-7-technical-256/need-info-future-build-1151449/)

Kybel1 05-12-21 02:51 PM

Need info on future build
 
Hi guys I'm new here and I got some questions on a future 13b rebuild.
so I got a 13b out of a gslse that has seized from sitting to long and I plan on trying to rebuild it. My plan is to get a racing beat engine rebuild kit and street port template and I was given a set of sequential twin turbos off of an fd3 for free and I plan on using a blow through carb because I can't find a tuner closer than 8 hour away. What are some issues I might run into.

diabolical1 05-13-21 09:58 PM

welcome to the board. :)

well, first things first, you need to know if the engine is indeed usable. next thing is the blow-through setup. it's been done many times over, but it begs the question as to why. additionally, i suspect you're over-complicating your life even more by trying to use the twins, too. you mentioned that you're going with a carbie because you can't find a tuner, but the fact of the matter is you'd be best served to have the car tuned no matter what setup you choose.

your potential issues are the extra complications that the twins might bring with the extra fabrication and tuning.


All times are GMT -5. The time now is 12:23 PM.


© 2024 MH Sub I, LLC dba Internet Brands