Injector plug connector adapter
 

Hello, I got an S4 with square injector plugs and adapter.

Sadly I accidentally bought oval injectors (impedance is the right one), does anyone know where I can find the right plug and play adapter and if its possible to just adapt them, or is there a wiring difference?

Thanks in advance

a very stupid Alex

Just watch that the Tab is in the right spot on the square section.
Some injectors are Offset tab and some are center notched tab.
That of course can tell you exactly what injector you are using too,as HI imp uses an Offset tab on the S4 N/A.
Make sure the impedance is correct.
IF So,then you have the choice to either adapt the harness using some plug in adapters to go from square to oval...OR just do a little wiring and change the connectors out.
(mark the Wires!..L1,L2.T1,T2.or you will have some fun..wunderin'..lol!..)

I think I got my adapters from Full Function Engineering (vendor in Forum)
You can also try Keith at www.injector-rehab.com

Can't really express how thankful I am, you really saved me on my project!
I hope to get the car running soon!
Love this comunity and hope to be able to contribute too some day.

Alex