How do I hand crank?
 

It's time to lube up the seals,

I've sprayed some oil into the spark plugs and now need to crank it over...


Can I just use the key/starter with a couple quick blasts to spin it over?

If not, how do I hand crank a 12a?

Since no one's answered and I couldn't find the info online,


Here's how:

Easiest way is to remove the fan and the fan shroud. A ratchet and socket is fine for the shroud though I can't remember what size to use.

For the fan itself, a pair of 10mm wrenches and extenders will work wonders as there is not enough room to get a ratchet in there.

From there, place the appropriately sized socket on the crank pulley and, with your ratchet, start cranking!

Note: make sure car isn't in gear. If engine isn't seized, it should turn over pretty easily!

?

What is your question if you know the answer?

the main pulley has a 19mm nut on the front that you can attach a socket to.

It was a question at first but since it took two days to approve thread I went out and figured it out myself. I'm usually very nervous working on cars so I don't like trying things without instructions.

Just thought someone else would appreciate the info if they're as unsure as I am.

u can actually turn these engines by hand, no wrench needed.

Ah. Okay. Glad you found the information :-)