A few questions!
I tried searching the forums for some answers, admittedly not as proficiently as I could have. There are a few things about my Rx7 that I'm not sure about and I'm too lazy and dumb to use search bars. (I did try for a bit but came up short on answers for some questions)
For one, my 5th gear makes this whining sound when I step on the throttle. Its only in 5th gear and the guy I bought the car from said this was a normal thing with the car. Manual says to use 10w40 guy I bought it from suggests 20w50. opinions? From what I've heard, K&B filter in the stock cold air compartment is better than just putting a cone on. thoughts? Best options for exhaust? Tips for maintaining the car? EDIT: OH and this damn alternator, how do I go about upgrading this thing? Thanks guys!! |
Originally Posted by RyanFox
(Post 11919678)
I tried searching the forums for some answers, admittedly not as proficiently as I could have. There are a few things about my Rx7 that I'm not sure about and I'm too lazy and dumb to use search bars. (I did try for a bit but came up short on answers for some questions)
For one, my 5th gear makes this whining sound when I step on the throttle. Its only in 5th gear and the guy I bought the car from said this was a normal thing with the car. Manual says to use 10w40 guy I bought it from suggests 20w50. opinions? From what I've heard, K&B filter in the stock cold air compartment is better than just putting a cone on. thoughts? Best options for exhaust? Tips for maintaining the car? EDIT: OH and this damn alternator, how do I go about upgrading this thing? Thanks guys!! *State the year and sub-model (i.e. TII etc.) in your posts or signature while in this section. *Don't be lazy. I wasn't when I went bothered to search your profile to find out you have a 87, or S4. *Yes, IMO a good flowing filter in the stock air-box sourcing ambient air is usually better than a cone filter sucking in hot under hood air. Admittedly not racing looking, but effective. Rather than a K & N which uses an oiled cotton media that might dirty up your MAS, you might want to search for what others recommend. I'm a FD guy and we have a MAP system which is unaffected. *Not sure about the whining sound in 5th, but it wouldn't hurt to change out the gear oil since the car is new to you. I recommend a good synthetic 75w90. While your at it, change out ALL the fluids, including and maybe especially coolant. Downloadable copies of the Factory Service Manual are available to help. *Exhaust is often a trade-off between emissions, noise and performance. But I suspect a header on a NA car is probably the biggest bang for your buck in that area regardless of the cat-back. *As to oil viscosity, I doubt it makes any difference. And when in doubt, stick with what your manual says. Know that with a rotary, I would make oil change intervals a little closer than what your used to in a piston engine. And when check the oil level, also check it for fuel dilution over time. |
Originally Posted by Sgtblue
(Post 11919985)
Tips?
*State the year and sub-model (i.e. TII etc.) in your posts or signature while in this section. *Don't be lazy. I wasn't when I went bothered to search your profile to find out you have a 87, or S4. *Yes, IMO a good flowing filter in the stock air-box sourcing ambient air is usually better than a cone filter sucking in hot under hood air. Admittedly not racing looking, but effective. Rather than a K & N which uses an oiled cotton media that might dirty up your MAS, you might want to search for what others recommend. I'm a FD guy and we have a MAP system which is unaffected. *Not sure about the whining sound in 5th, but it wouldn't hurt to change out the gear oil since the car is new to you. I recommend a good synthetic 75w90. While your at it, change out ALL the fluids, including and maybe especially coolant. Downloadable copies of the Factory Service Manual are available to help. *Exhaust is often a trade-off between emissions, noise and performance. But I suspect a header on a NA car is probably the biggest bang for your buck in that area regardless of the cat-back. *As to oil viscosity, I doubt it makes any difference. And when in doubt, stick with what your manual says. Know that with a rotary, I would make oil change intervals a little closer than what your used to in a piston engine. And when check the oil level, also check it for fuel dilution over time. |
1 Attachment(s)
Originally Posted by RyanFox
(Post 11919678)
For one, my 5th gear makes this whining sound when I step on the throttle. Its only in 5th gear and the guy I bought the car from said this was a normal thing with the car.
Originally Posted by RyanFox
(Post 11919678)
Manual says to use 10w40 guy I bought it from suggests 20w50. opinions?
Originally Posted by RyanFox
(Post 11919678)
From what I've heard, K&B filter in the stock cold air compartment is better than just putting a cone on. thoughts?
Originally Posted by RyanFox
(Post 11919678)
Best options for exhaust?
Originally Posted by RyanFox
(Post 11919678)
Tips for maintaining the car?
- The secondary injectors kick in around 3,800 rpm. If you drive like a grandma and never get past 3,800 rpm then the secondary injectors will clog up, then that one time you need to step on the gas pedal to pass a car the engine will blow due to an extreme lean condition. No, I am not kidding. Therefore, be sure to accelerate the engine up in the rpms on a regular basis. Note that this does not mean to redline the engine on a regular basis, which is a common misconception. - Mix the coolant with distilled water, not tap water. You can buy distilled water from most drug stores for a little over $1 per gallon. - Whenever I buy a used RX-7, one of the first things I do is replace the two O-rings under the oil filter pedestal. This is because they crack over time, causing oil to drip on the heater hose which will eventually develop an intermittent pinhole leak that will drive you nuts. - Check all of the rubber fuel lines, as most of them are cracked and scary at this age. - If the stereo surround is cracked, consider replacing it with a Series 5 surround that is more rubbery and less prone to cracking. Note that this also requires changing the associated heater vents to Series 5. - Pulsation Damper
Originally Posted by RyanFox
(Post 11919678)
EDIT: OH and this damn alternator, how do I go about upgrading this thing?
|
All times are GMT -5. The time now is 02:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands