FD Engine's Bolts full kit
 

Hi,

Since my 93' engine bay is full of rusty bolts, I was looking for a replacement kit to replace them all.
I stumbed upon that titanium kit (below) on ebay.
Looks very nice to me, except the price (+200$ delivered to France)

Do you guys know a cheaper kit ?
Or where I can find a list of all necessary bolts, with their spec, so I can order them separately.

Thanks
https://cimg8.ibsrv.net/gimg/www.rx7...b2e282abc9.jpg

Have you considered removing the rust from the bolts you have and/or refinishing them? You could pick up a vibrating tumbler to remove rust. (Harbor Freight sells one that works fine.) There are also companies that can zinc coat them for you.

Yes, I did.
But, I don't really want to bother with this, this time.
thanks for your answer anyway !

----> Engine - Rotary : Himni Racing, Turbocharger, Turbo, Garrett, Turbo Kit, GReddy, Mazda RX-7, HKS, Apexi, TiAL, TurboXS, TurboSmart, Flange, Turbonetics, Exhaust, Intercooler, ACT, Intake

Almost all of the 10mm head fasteners will be M6x1.00. Almost all of the 12mm head fasteners will be M8x1.25

I just get a quantity of stainless button bolts and nuts/washers from Amazon. Like SgtBlue points out, most of what you need are common sizes.

Is the ebay ad picture the actual complete kit, or just a snapshot?

it looks like the full kit...
https://www.ebay.fr/itm/221682040628...84.m1436.l2649

but I just found another cheaper one (but no titanium), with more pieces :
https://www.ebay.fr/itm/JDM-80-PIECE...MAAOSw~l1Z8Vzq
https://cimg2.ibsrv.net/gimg/www.rx7...1f2f7f9dc9.jpg

Probably 90% of those socket-head stainless bolts and washers are available to me as close as the nearest Westlake/Ace Hardware store for less than $50.

For sure ! btw, thanks for the informations you gave previously.
I'll take care of this as soon as I get my 7 back.

If I ever make it to France I want to buy you un cafe - thanks for the thread! Inspired me to spend more money on my East coast car.