F+R Brake pad + rotor replacement
Hey guys,
I'm hoping to install new brake pads and rotors on my '83 RX7 in the next few days, but haven't changed these out on a car without wheel hubs before. Do the rotors just slide off? Will I need a bearing press to remove + re-install the bearings? If I don't have a bearing press, am I better off just having a workshop do it instead? I searched a bit and couldn't find much on the topic, so any help would be appreciated! |
No bearing press required.
You can go to http://foxed,ca and get the manuals. They don't have the 1983 factory service manual but this 1985 will get you what you need. http://foxed.ca/rx7manual/manuals/19...11)braking.pdf |
Originally Posted by KansasCityREPU
(Post 12106305)
No bearing press required.
You can go to http://foxed,ca and get the manuals. They don't have the 1983 factory service manual but this 1985 will get you what you need. http://foxed.ca/rx7manual/manuals/19...11)braking.pdf |
All times are GMT -5. The time now is 08:37 PM. |
© 2024 MH Sub I, LLC dba Internet Brands