RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   New Member RX-7 Technical (https://www.rx7club.com/new-member-rx-7-technical-256/)
-   -   Drifting my N/A. (https://www.rx7club.com/new-member-rx-7-technical-256/drifting-my-n-1130805/)

Teamskidmark 10-16-18 12:09 AM

Drifting my N/A.
 
yo yo, so been drifting my 89 na fc! I want to find a lower gear ratio diff for it. (So that way can drift more in 2nd gear) seeing if anyone has any info on that, or even a good idea. I can rip it really good around out little local drift track, I just don’t have enough acceleration in second gear with out it bogging out while clutching kicking the crap outta of it. Figured find a lower gear ratio, with open diff so can weld it. Feel like would work good. Thank ya thank ya!

FührerTüner 10-16-18 07:38 AM

TII diff is LSD and 4.10s. You'll need TII axles. Direct swap.

Teamskidmark 10-16-18 12:16 PM

I have a lsd, and isn’t the 89 na’s ratio 4.10 as well?

FührerTüner 10-16-18 01:08 PM


Originally Posted by Teamskidmark (Post 12307789)
I have a lsd, and isn’t the 89 na’s ratio 4.10 as well?

Not sure TBH.

Freeskier7791 10-16-18 02:11 PM

if you have an NA diff you could swap in anything that fits 1.8 miatas or FB rx7s. Do you want something like a 4.56 so you can use third gear? Kia Sorrento front ring and pinion should fit I think if so

_Tails 10-20-18 11:44 AM

Os Giken 2 way and Mazdtrix 4.7 Ring & Pinion, Pricey but

diabolical1 10-20-18 04:51 PM

Check this out: Rear end thread


All times are GMT -5. The time now is 11:38 PM.


© 2024 MH Sub I, LLC dba Internet Brands