TheSeanZBoy |
08-01-16 10:09 AM |
85 Nikki troubleshoot
Whats going on everyone? I messed up and posted in the regular technical forum on accident. My bad. Ill start off by saying that I have done extensive research and havent gotten far with my current situation. Ok, here is where I sit. I have rebuilt and stripped the carb. I had to make a custom weight for the accelerator circuit due to losing one. I followed a tutorial on here for weight size. The carb is completely clean and clear. Every passage has been blasted with air and B12. I removed the cone filters above the floats due to being very bent and messed up. I am using a gravity feed 2 gallon tank, with no fuel pump, for troubleshooting purposes. (old fuel pump was shot). Everything is hooked up and no vaccum leaks. Floats adjusted perfect. Compression is great. As for the problem, it will gush fuel from the firewall side primary nozzle and almost none will come out of the other primary, all at idle. When you step on it, it will shoot fuel out of both evenly. I suspected the idle circuit was plugged but have ruled that out. The exhaust is getting very hot too due to the lean condition. Any help would be greatly appreciated.
|