13bRE turbo e6k, idles for 3 secs and dies
 

Hello,
I am having a problem with my car and need someones help please
The car starts well and idles nicely, albeit a tad slow, but dies after 3 seconds.
I can't keep it running with the throttle open or closed.
Here is a video:
http://www.youtube.com/watch?v=PaQ7YzqyVIs

Aaaaand the data log:
http://i1222.photobucket.com/albums/...uddenstall.jpg

Fuel pressure is fine, pump runs for 2 secs after the engine dies.
Spark is present from start to end (seems to still occur whilst it dies)
Which leads me to think injector pulse is not existant, ie. e6k issues?
I seem to have RPM the whole time so I don't think it is that but I'm pretty new to this game...

I have not locked the timing yet as it wont idle for long enough.
I used the "I don't know what I'm doing method" of installing the CAS with the two points lining up with the bolt holes.
Has anyone experienced this before?

Any help will be much appreciated.

Not touched an E6K for a long time, but have you tried just increasing the the amount of fuel in the afterstart and warmup enrichment?

Odd that injectors drop to zero for a second even though there is an RPM signal. E6Ks were known for trigger problems. How is your CAS wired up?

Thanks for the reply.
No I havn't tried increasing the fuel, I'll try that today.
Here is what I have done with the CAS:
CAS Red Yellow - trigger
Green Green - home
White Red - Input B
White/black Blue - Input A

Opened up the ecu and this is what greeted my eyes:
http://i1222.photobucket.com/albums/.../photo0134.jpg
http://i1222.photobucket.com/albums/.../photo0136.jpg

Pretty disappointed, but now I have an excuse to buy a new Haltech.
Recommendations?

Platinum sport 1000..excellent ECU.

Turn out it's nothing to be worried about... I enriched the post start map and it runs for about 10secs now. Will need to get it tuned soon :)

try the Haltech side of this Forum,and post for a map.
also try a guy named C. Ludwig on forum here,as he sells Haltech and may be able to shed some of his expertise on you.

I've seen a bit from C. Ludwig from googling my haltech problems so far, seems pretty cluey about these computers thats for sure. I tried to post in the Haltech area but I needed 5 posts... Which I now have!

I knew ya could do it!..haha.(if I kept postin little blurbs to get ya to answer!)
Good luck!

Lol stoked. Thanks mister :)

On my haltech E6k all my ijectors pulse at once.?