Half bridge 6 port
Car is an 88 GTU.
Im running an rtek 2.0 for fuel management Porting will be a combination of the pineapple street port and mazdatrix half bridge with a EP2 exhaust ports. With 2mm fly cuts in the housings. D porting the irons, and really opening up the intake tract im machining solid dowels, I'll be using a steel lightweight flywheel. Modified Atkins aux sleeves "altered for the bridge", and a ford lumbar pump activated via rtek to control the aux ports. I'll try and keep this updated as I go, I should have my housing and new apex seals back from goopy later this week. https://cimg5.ibsrv.net/gimg/www.rx7...e749359c30.jpg https://cimg6.ibsrv.net/gimg/www.rx7...f80d33666d.jpg https://cimg7.ibsrv.net/gimg/www.rx7...4986d58e3.jpeg https://cimg1.ibsrv.net/gimg/www.rx7...2a7f2566a.jpeg |
|
Working on the center iron today
https://cimg2.ibsrv.net/gimg/www.rx7...83f6c3846c.jpg https://cimg4.ibsrv.net/gimg/www.rx7...02fd1568b6.jpg |
Modified Atkins sleeves to open/close the aux bridgehttps://cimg0.ibsrv.net/gimg/www.rx7...69d5b7520d.jpg
https://cimg1.ibsrv.net/gimg/www.rx7...6ea5dd0987.jpg |
Got the irons painted, still waiting for my housings to come back from goopy
https://cimg5.ibsrv.net/gimg/www.rx7...b203e61fad.jpg https://cimg6.ibsrv.net/gimg/www.rx7...66027c79a6.jpg |
What are your power goals for this? I have a 6port I about to either Bridge or try and 4port Irons and bridge those. Its not super easy to find a lot of information on NA performance. I really like where your build is going.
|
Originally Posted by 13bREW
(Post 12120081)
What are your power goals for this? I have a 6port I about to either Bridge or try and 4port Irons and bridge those. Its not super easy to find a lot of information on NA performance. I really like where your build is going.
|
Here's some before-and-after pictures of what I'm doing with the middle intakehttps://cimg1.ibsrv.net/gimg/www.rx7...d2578ba99.jpeg
https://cimg5.ibsrv.net/gimg/www.rx7...fa13c1e9b.jpeg https://cimg7.ibsrv.net/gimg/www.rx7...6d9b2deee.jpeg |
|
|
|
Originally Posted by dpartinvr4
(Post 12121276)
|
Got the intake painted up, Still waiting on goopy to call me back on my rotor housings, then I can resemble everything.
https://cimg0.ibsrv.net/gimg/www.rx7...15f50894f5.jpg |
Aluminum baffle made up :)https://cimg8.ibsrv.net/gimg/www.rx7...9159634503.jpg
|
Still waiting waiting on my housings/apex seals from goopy, in the mean time I decided I liked flat paint better than glosshttps://cimg5.ibsrv.net/gimg/www.rx7...22253f77e7.jpg
|
I'm really interested to see your progress. Looks great so far.:icon_tup:
|
Originally Posted by Mark Boss
(Post 12125153)
I'm really interested to see your progress. Looks great so far.:icon_tup:
|
Finally heard back from goopy, should have everything back this week :)
|
|
Well, since it's another wasted weekend waiting for my housings from goopy, I put the keg together with junk housings to start building the lines for the oil bypass and fuel lineshttps://cimg7.ibsrv.net/gimg/www.rx7...dca9bd02aa.jpg
https://cimg9.ibsrv.net/gimg/www.rx7...3ebec1830d.jpg https://cimg5.ibsrv.net/gimg/www.rx7...1d1e20913f.jpg |
why, solid dowels? also i could make you a solid hard line an -10 to 10. or guide you how to make your own.
|
Originally Posted by lastphaseofthis
(Post 12131628)
why, solid dowels? also i could make you a solid hard line an -10 to 10. or guide you how to make your own.
The external oil line is just fine with -6 line, the port itself is only roughly that size anyway, and bypassing the two 90° bends and turbulent dowel threads alone flows better. |
Getting some fuel line mock up donehttps://cimg0.ibsrv.net/gimg/www.rx7...bd5a671294.jpg
https://cimg2.ibsrv.net/gimg/www.rx7...0117551eb3.jpg |
Looks clean.
|
Housings show up tomorrow!!!!!!
|
All times are GMT -5. The time now is 04:42 AM. |
© 2024 MH Sub I, LLC dba Internet Brands