enzo tune,my full bridge t2 n/a
tune done on a mainline dyno, which reads less than other dyno's, enzo has tuned alot of rx7's from the forum in the nj,ny,and pa, areas, including his own track beast 7, enzo knows his dyno reads 25% off from true numbers, after my tune his dyno read 208 @8500 rpm, add 25% difference,which put me at 260, now i dont feel that is what i put down, were as i think its more in the 20% to 17% difference which is putting me in the 249-244 whp range. its a known fact that mainline dynos dont put out correct #s, ive searched the web and found numorus threads about tunners cars reading less than there true numbers. im very happy with the results of this build, many thanks to jpr in south jersey and enzo. i plan on having some freindly runs with some friends to see what she can do. and will report back results good or bad.
|
some vids of tune...
|
vid of enzos 7 tearing it up, for those who dont know about him, car runs faster now 8.6,
http://www.youtube.com/watch?v=SU2HRPTGktw&NR=1 |
that thing sounds like a machine gun @idle! i'd be happy with 208hp too, especially on a t2 intake!
|
Dyno numbers are like map numbers in the ECU, the actual number doesn't matter. What matters is if the engine works or not.
We just had a car on the dyno, the operator said it was "480 at the wheels" on the first pull. I thought about it, and the injectors were dumping fuel for about 450 or so at the crank. :lol: No way was it 600hp at the crank, which is what I'd expect for an automatic car, unless you can get sub- .40lb/hp/hr on C16. |
Originally Posted by jorx7
(Post 10725311)
vid of enzos 7 tearing it up, for those who dont know about him, car runs faster now 8.6,
http://www.youtube.com/watch?v=SU2HRPTGktw&NR=1
Originally Posted by peejay
(Post 10726049)
Dyno numbers are like map numbers in the ECU, the actual number doesn't matter. What matters is if the engine works or not.
We just had a car on the dyno, the operator said it was "480 at the wheels" on the first pull. I thought about it, and the injectors were dumping fuel for about 450 or so at the crank. :lol: No way was it 600hp at the crank, which is what I'd expect for an automatic car, unless you can get sub- .40lb/hp/hr on C16. |
Originally Posted by jorx7
(Post 10725295)
i'm very happy with the results of this build, many thanks to jpr in south jersey and enzo.
|
Originally Posted by diabolical1
(Post 10731077)
this is all that matters, right here. sounds like a good result. congratulations.
|
All times are GMT -5. The time now is 10:01 PM. |
© 2024 MH Sub I, LLC dba Internet Brands