cold start issue
i have a 1986 rx7(GXL). when the motor is cold, i have to warm it up by revving it to about 3k for a few mins. I crank it and it wont idle by itsself.. i have to keep revving it until it gets warm enough or it will die instantly.
any suggestions? |
BAC (I think thats what they were called on FC's) valve blocked or somehow not properly functioning?
|
thank god i just bought a haynes manual. another friend of mine told me it might be the BAC valve not working properly. Time to find it!
ty |
possibly the BACV or Thermowax on the back of the TB.
|
both are on the back of the throttle body?
|
On a S4 NA, the BAC is on the driver's side of the intake manifold. It's cylindrical and lies parallel to the ground. It also has a coolant line running through it. The thermowax is on the firewall side of the throttle body. It also had a coolant line running through it.
|
Originally Posted by Shainiac
(Post 8095887)
On a S4 NA, the BAC is on the driver's side of the intake manifold. It's cylindrical and lies parallel to the ground. It also has a coolant line running through it. The thermowax is on the firewall side of the throttle body. It also had a coolant line running through it.
tyvm, i plan on fixing it this weekend. it took forever to warm up this morning. and it sometimes dies on me for no reason when its not been driven for atleast 5-10min. thanks again! :) |
All times are GMT -5. The time now is 01:55 AM. |
© 2024 MH Sub I, LLC dba Internet Brands