hall 36-2 tooth kit for m2r
 

about to buy a hall type ref kit need help on install

fd3s running motec m2r

i am going to buy a hall 36-2 t kit
http://fullfunctioneng.com/product/fd-trigger-hall/

im just wondering how a single sensor replaces both original mag sensors
i have looked at the sync ref setup but cant find an option to disable one sensor
any 1 done this ?

this is what they sent me and i cant put the ref/sync mode in as 6 or 8
have i mised something
Motec V3 (M400,M600,M800)
36-1 / Hall Sensor
Ref/Sync Mode 6
Crank Ref Teeth 36
Tooth Ratio 50
Crip 100
REF Sensor Type 1
REF Sensor Edge Polarity 0
REF Trigger Voltage 0
Sync Sensor Type 1
SYNC Sensor Edge Polarity 0
SYNC Trigger Voltage 0


36-2 / Hall Sensor
Ref/Sync Mode 8
Crank Ref Teeth 36
Tooth Ratio 50
Crip 90
REF Sensor Type 1
REF Sensor Edge Polarity 0
REF Trigger Voltage 0
Sync Sensor Type 1
SYNC Sensor Edge Polarity 0
SYNC Trigger Voltage 0

An M2R is a DOS based program. What you are referring to in the setup notes as a V3 MX00 Series ECU is completely different. I can look into this and get back to you.

EB Turbo