|
Banzai Racing
110 E Catholic St. Pierceton, IN 46562 Ph: (574) 594-2035 Contact: Chris Sanders/Owner Email: chrissanders@netzero.com Great work, great prices, 1st, 2nd & 3rd gens |
SPEEDZONE
LAS CRUCES, NEW MEXICO HAVE BEEN WORKING ON ROTARYS FOR ABOUT EIGHT YEARS:devil: :devil: |
Guys for the area In Ky My Old Shop was Shear Performance, In Richmond,Ky Now Taking on a New Partner And Change Of Name Its now A+ Auto Care & Performance, Located just down the street from the old building At 531 Big Hill Ave, Ph 859-623-3454- Or My cell At 606-471-0231, I do Rotarys 1,2,and 3rd Gens Engine Builds to carb tuning Suspensions, Brakes, Engine swaps Like twin turbo to 2nd Gen Chasis, any thing to do with rotarys. //Louis//
|
A C Autorepair
AC Auto Repair in Aurora, IL. Jayme worked on my car. He was straight up they don't work on Rotaries on a daily bases but he is smart enough and has skills to fix the problems. He understands the engines well and has experience. Plus he's honest...
|
Originally Posted by krwgtr
Guys for the area In Ky My Old Shop was Shear Performance, In Richmond,Ky Now Taking on a New Partner And Change Of Name Its now A+ Auto Care & Performance, Located just down the street from the old building At 531 Big Hill Ave, Ph 859-623-3454- Or My cell At 606-471-0231, I do Rotarys 1,2,and 3rd Gens Engine Builds to carb tuning Suspensions, Brakes, Engine swaps Like twin turbo to 2nd Gen Chasis, any thing to do with rotarys. //Louis//
Outstanding shop for just about anything you want, rotary or boinger. I highly recommend him to anybody. |
Hello
We are Rotary Resource Located in Tulsa OK.We only repair/rebuild/tune rotary motors 12A,13B,13BT,13BTT from $1500 installed 12 day turn around time.We also have the largest supply of RX-7 parts inOKLAHOMA.We offer Customers a few differant types of apex seals to choose from however we prefer te atkins design.All motors have a 90day labor 1YEAR PARTS WARRANTY. Thanks ROB ROTARY RESOURCE@juno.com 11522 E 28TH ST TULSA OK (918)280-8895 |
fender menders in milton Wi, this guy is a one man shop that has done a lot of work for me in the past. he worked in the pits for mazda and has done some racing as well if i remeber right. VERY FAIR PRICEING and has a lot of parts cars around if you need anything in the used category. as the name says he does body work as well.
|
http://www.alamorotary.com/index.html
never been there but I've heard good things and they seem like they know their stuff |
|
I used RX-7 Store in Columbus OH and they did fantastic work on my car. I drive 2 hours one way to have them do work on my car. I have a T-88 single turbo car and right now they have my car pushing 440 hp, soon to be over 500. I recomend this shop.
|
Originally Posted by Damon7
I used RX-7 Store in Columbus OH and they did fantastic work on my car. I drive 2 hours one way to have them do work on my car. I have a T-88 single turbo car and right now they have my car pushing 440 hp, soon to be over 500. I recomend this shop.
I will 100% agree with you on this one they work miracles there. my car was fucked up from another shop and i mean fucked. i can't say the shop name yet because i'm sueing them, and decided to go to the rx7 store and give zavier and jason a shot at fixing my car. i will say 100% worth the 7 hour drive out there. (the only thing i can say is the other shop that fucked my car up, is the owner has man tits and is a crook as well as a liar) But out here we have a nick name for him MR. Hankie just like south park he's a walking talking piece of shit. that i can't wait to see oh boy talk about an ass whooping |
G&M Lawn and Sport
2167 St. Hwy 371 NW Hackensack, MN (45 minutes north of Brainerd on 371) 218-831-6465 Justin Anything from Small Engines to Mazda Rotary. |
In cincinnati: International Performance Motorworks does really nice work and (as unbelievable as it sounds) King's Mazda has a guy that knows how to work on 7's *Wow* He's done some stuff for me before...
In Columbus: Passen Motorsports... The guy there that does most(all) the rx7 work is named JJ and he's excellent with 7's as well... all the guys there are cool as hell too... Anybody have anymore info on these shops? Phone numbers, addresses, anything!! |
Originally Posted by wishbanzai
In cincinnati: International Performance Motorworks does really nice work and (as unbelievable as it sounds) King's Mazda has a guy that knows how to work on 7's *Wow* He's done some stuff for me before...
In Columbus: Passen Motorsports... The guy there that does most(all) the rx7 work is named JJ and he's excellent with 7's as well... all the guys there are cool as hell too... Anybody have anymore info on these shops? Phone numbers, addresses, anything!! Passen is now a stereo shop and JJ hasent worked there in 2 years. Most of the cincinnati shops send their RX-7 work to us, but I havent heard of International Performance Motorworks. |
Originally Posted by BOOSTD 7
Shop name: Rotary Doctor
Location: Neosho, MO Owner: Kyle Seaman Phone: (417) 451-9661 Description: Small one mechanic shop with a good selection of parts cars. Kyle is one of the most knowledgable guys I've ever known. He has every nut and bolt memorized on RX-7's. Not to big on doing extensive modifications. But builds good motors, and does excellent repair work. He's a good guy that's supported rotaries since the early 70's. He deserves your support if you live in SW Missouri. |
Hello, My name is Omar J. Mena the owner of OJIMPORTS.COM rotary engine builders and general maintenance. We are located in McAllen Texas (south Texas). Like other rotary builders, we offer anything from standard engine builds, to the common MONSTER STREET PORTED engines. We do offer one unique job that almost no rotary engine builder I have seen offers and that is to bench flow a rotary!Our flow bench is a super flow and we have custom made all adapters and block offs to precisely flow all model rotary engines. Port/polish/flow work really pays off compared to an eye ball port job. Turbulance created by unequal port flow is practically eliminated and hp numbers are significantly raised. Call OJIMPORTS @ 956 739 6362 if you would like some hard to find port flowing done on your rotary. (Over 8yrs of professional rotary engine building.)
|
RAMSEY MAZDA-SUBARU-PORSCHE
(515) 278-6400 9625 Hickman Rd Des Moines IA 50307 |
Originally Posted by Indyparts
(Post 7233595)
Hello Fellow RX7 Enthusiasts,
Let me take a moment to introduce myself… Many of you know me as Indyparts. For those of you who don’t, my name is Rick Hawley, and I, with a little help from my friends, have been providing the Rx7 community with parts for nearly 10 years. However, like all great small ventures, it has come time to expand. Allow me to introduce, Rick’s Speed Shop. We are in construction phase of this endeavor that should be in full production during the Spring of 2008. The shop is based in Winchester, Indiana and has plenty of space for expansion. Our mission will be to continue to provide quality parts and great service for a fair price. Over the course of the many years, Indyparts has accumulated over 50+ FC shells with a handful of FB and FD shells as well. The availability to find that one part “To make your baby purrr” will not change, but we decided to expand into other areas as well. I, Rick, often have many “irons in the fire” or “balls in the air,” pick your cliché – realized Indyparts need some help. Rick’s speed shop would like to welcome Mike Smith. Mike has substantial FB and FC experience under his belt. In addition he is currently working on his project which is a Rotary powered Mazda B2000 pickup. You can see more information on this at the website. Mike will be heading up the parts sales from this point forward and getting acclimated with the current inventory. If you need anything specific for your Mazda (specifically 86-91) please get in touch with him. We are excited about bringing him on and hope that he will be able to assist the community. Going forward, we plan to branch out past parts sales and work towards engineering custom parts specifically for the 2nd / 3rd Generation Mazda Rx7. In addition, we plan to start a powder coating service with core return. With the broad amount of parts we already have inventory, exchange service should keep things simple. Look for custom cars being built for customers as well. Who knows where it will end :-) If you have any questions, please feel free to email me. Rick Hawley Rick@RicksSpeedShop.com Mike Smith Mike@RicksSpeedShop.com |
**SELF PLUG**
Shop name: Spooled up Racing Owner nameDavid Hensler Address: 4333 Cordes NW Comstock Park, MI 49321 Phone number 616-389-3270 (call or text) specialty 2nd gen parts removal and install, Good at diagnosis side notes I have a handfull of parts on hand but can have many parts (from oem to aftermarket, stock or performance) within 24-48 hours. I will do any part install (from basiac brakes to tune up to engine and/or clutch tranny installs I will also allow others to use my facility/tools to do work on their car for little to no payment (lunch/dinner, beer etc) I work out of my garage at home, and I will work on boingers as well.. |
Banzai Racing
Originally Posted by Merlot
(Post 2549997)
Banzai Racing
110 E Catholic St. Pierceton, IN 46562 Ph: (574) 594-2035 Contact: Chris Sanders/Owner Email: chrissanders@netzero.com Great work, great prices, 1st, 2nd & 3rd gens http://www.banzai-racing.com/ryanS_rebuild.htm |
trochoid, me :)
Scott McDuffee St Joseph MO e-mail: srmcduffee@hotmail.com or PM here on the forum I specialize in 1st gens, all aspects of repair, rebuild or replace. I can, will work on any rotary but refuse to touch the engine bay of 3rd gens. I built a single stall garage, with a pit, a few years ago just to work on my 7s. Most of my work comes from the Kansas City area but have done work for members as far away as Canada. Not only do I do most any mechanical repairs/upgrades you may need, I also do restoration/preservation work for those that want keep or bring thier 7 back to a new condition. This includes sandblasting, painting, powdercoating and fiberglass work. For those not familiar with my work, the following link shows part of my widebody build project. https://www.rx7club.com/build-threads-293/unvieling-12a-bp-widebody-462184/ My pricing is fair and I never hurry a job simply to get it finished. All work is done with the same care and detail as if it were my own. Scott. |
another bump for BANZAI RACING
Chris definately knows whats going on in these cars. all gens. |
Originally Posted by SpooledupRacing
(Post 7346976)
**SELF PLUG**
Shop name: Spooled up Racing Owner nameDavid Hensler Address: 4333 Cordes NW Comstock Park, MI 49321 Phone number 616-389-3270 (call or text) specialty 2nd gen parts removal and install, Good at diagnosis side notes I have a handfull of parts on hand but can have many parts (from oem to aftermarket, stock or performance) within 24-48 hours. I will do any part install (from basiac brakes to tune up to engine and/or clutch tranny installs I will also allow others to use my facility/tools to do work on their car for little to no payment (lunch/dinner, beer etc) I work out of my garage at home, and I will work on boingers as well.. **info update** Phone number is: 616-516-5580 ALSO DOING: Engine porting, rebuilds, part supplier, all engine, suspension, trans work. |
FNR Racing, location 1203 Cliff road east, Burnsville, MN 55337 Its a new shop and me and my buddy are the only two that work on rx7's we are currently just getting started we do have a dyno and any rotarys are welcome to stop by. By the way the other guy that works here is a microtech certified tuner. plus we had him move back up here from florida to work on rx7's. Phone lines will be up soon so in the mean time come check us out.
|
Tintmasters Motorsports
4201 Main Ave Fargo, ND 58103 High quality shop. http://www.tintmasters.net/ |
| All times are GMT -5. The time now is 08:28 AM. |
© 2024 MH Sub I, LLC dba Internet Brands