RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Microtech (https://www.rx7club.com/microtech-111/)
-   -   Microtech Ways to improve throttle response from idle? (https://www.rx7club.com/microtech-111/ways-improve-throttle-response-idle-727304/)

MaczPayne 02-04-08 02:57 AM

Ways to improve throttle response from idle?
 
My TII runs great, and is very responsive in every RPM... except idle.

When I bury the pedal at idle, the motor stumbles a bit and then revs up.
My idle is around 900RPM, and I'm pulling about 18-20"Hg on the Hand controller's gauge.

So my question is:
-Would removing fuel at the corresponding vacuum range in the idle map improve the responsiveness at idle?

If there are any other suggestions, I'm willing to try them!

Thanks!

rx72c 02-04-08 04:55 AM

Show me your pump settings.
thats where the problem will be.

MaczPayne 02-04-08 04:05 PM

Thanks for the quick reply. I'm currently at school right now, so I'll get it to you when I get back to my car.

MaczPayne 02-04-08 06:50 PM

Alright, here's my pump settings:

Pump1 +10%
Pump1pulse +05
pump1trig +10
pump1stop 00"Hg
pump2start 2000RPM
pump2amt +30%
Pump2time +10
Pump2trig +16
pump2stop 00"Hg
pump1&2adv +05deg
pump1&2dwell 3.00
pump1&2timer no
pump1&2sync no
pump1&2spare 0
pump1&2cold 0

The car was tuned by Steve Kan, so I don't know if tweaking my pump settings would affect my tune under load.

rx72c 02-05-08 12:38 AM

no it wont but how come he didnt address the issue when it was tuned? seems rather odd then all these big $$$ tuners cant get it right.

Pump1 +25%


Put that in. And see if it improves.

MaczPayne 02-05-08 12:46 AM

Thanks man. I'll try that tomorrow when I head to class, and let you know how that goes.

MaczPayne 02-05-08 11:28 PM

Alright, setting the pump1 to +25% did the job. Is this a setting you typically use on your cars? My motor is on stock ports by the way. Thanks a bunch!

rx72c 02-06-08 03:25 AM

Most cars use pump1 30% from what ive seen but depending on the tune it can change.


If your load maps are rich then the pump 1 setting at 10% will work. But if your load maps have been cleaned up very very well then the pump setting will need to be richer.

Good to hear your problem is fixed. happy to help.

MaczPayne 02-06-08 03:40 AM

Steve cleaned up my maps pretty well, so I found it kind of surprising how +25% improved my response that much. Before the car would just stutter when I go wot suddenly, now it responds as it should.

rx72c 02-06-08 04:13 AM

Yeh its common. See heaps of them.

A good tuner
WILL GO THROUGH everything when he tunes a car.

When i tune a car i like to keep it over night, so i can do cold start and iron out any bugs in the tune as sometimes the dyno only covers 50% of the tune.


All times are GMT -5. The time now is 07:48 AM.


© 2024 MH Sub I, LLC dba Internet Brands