Tachometer reading is half than the microtech says...
My microtech is configured correctly at 4 cyl for a 2 rotor engine, the idle is 750, but my tachometer is barely registering, I have it hooked up at the stock position, what else could be the problem?
|
Check the wiring around the trailing coil plug. If it's in poor condition or the plug is dirty, the tack will be random...
|
the tach itself could also be damaged from a voltage spike if it was incorrectly wired up initially.
|
Okay, I found out what was wrong. Apparently my trailing coils aren't firing, so I'm only getting readings from the leading coil. I have power to the microtech, and I am doubly sure that I wired the trailing coils correctly. I checked, double checked, and triple checked them. I'm gonna see if I can get a set of working coils to see if they work.
|
Fixed the problem.
Someone had set the spark trigger to negative when it was supposed to be +maz. |
All times are GMT -5. The time now is 08:23 AM. |
© 2024 MH Sub I, LLC dba Internet Brands