stock map listed in sticky
 

i was wondering if i could use the stock map in the sticky forum for my LT8 until i can save up to get a dyno tune. this is what my current mods are

s5 jspec motor
front mount intercooler
greddy type s bov
550cc primary 1680 cc secondary injectors
parallel fuel setup
sx fuel pressure regulator
walbro fuel pump
3in turbo back exhaust
greddy profec b
greddy turbo timer
apexi filter

or if someone could post a better map for me that would be greatly appreciated too.

no, becouse of your injectors. Stock map for stock injectors.

well if i would leave the stock injectors in their until i can get a dynotune would it work with the rest of my stuff?

Yes, just be careful. No boosting until you can get a proper wideband or some dyno time. Also, FWIW you could use the stock map with your big ass secondaries, you just won't be able to accelerate much once they kick in. ;-) Ask me how I know.
-John

im guess they run pig rich

Yeah, just a little....which probably saved my car. We adjusted my load map from 0-15 psi of boost but left above that set to stock. During testing I blew the cheapy rubber vacuum line to the wastegates. Hit about 20 psi quicker than I could blink, but went full rich at the same time. No harm, no foul.