Sending LT-8 through a dry run
 

I remember reading some place that there is a way to make the LT pulse the injectors without running the engine, to make sure that each one is firing right.

How do I do this?

Under the config setting where you set the number of cylinders set it to 0, this will put you in test mode.

Ignition ON
Pull CAS and spin manually


-Ted

yes exactly...as "LT8TurboII" stated this will cause the ecu to go into test mode and it will pulse each injector and igntioin output. This is a great function to use to determine if you wired your outputs correctly

Thanks :)