S8 13B Microtech help needed
 

13B-REW
Converted to single GT35R
Primary 850's (moved from secondaries)
Secondaries 1300's (bored out 850's)
Stock port cleaned up a little (mild extend at best)
S5 Cas Conversion
2x bosch 044
magnafuel pressure reg set at 40psi
Microtech LT10S with X4

This is how the motor came to me im looking for a base map for this to get it running as all the settings have been set to f*d up figures all the way through dont know why.

:fingersx: can i used the sticky TII base map for this? :fingersx:

I dont have a dongle so cant do it on a laptop atm only have my brothers hand controller from his car to redo it all.

Any help would be greatly appreciated Thanks in advance

to give an idea on what im dealing with there maybe more im missing

30" ~ 4.95
25" ~ 4.95
20" ~ 4.95
15" ~ 4.95
10" ~ 4.95
05" ~ 4.95
00" ~ 4.95
2psi ~ 4.95
4psi ~ 4.95
6psi ~ 4.95
8psi ~ 4.95
10psi ~ 4.95
12psi ~ 4.95
14psi ~ 4.95
16psi ~ 4.95
18psi ~ 4.95

Load Map
Screen 3

30" ~ 9.00
25" ~ 9.00
20" ~ 9.00
15" ~ 9.00
10" ~ 9.00
05" ~ 9.00
00" ~ 9.00
2psi ~ 9.00
4psi ~ 9.00
6psi ~ 9.00
8psi ~ 9.00
10psi ~ 9.00
12psi ~ 9.00
14psi ~ 9.00
16psi ~ 9.00
18psi ~ 9.00
20psi ~ 9.00


Pump Map
Screen 19

Pump2Start ~ 2000
Pump1Amt ~ 10
Pump1Pulse ~ 02
Pump1Trig ~ 14
Pump1Stop ~ 00
Pump1Adv ~ 05

Pump2Time ~ 10
Pump2Amt ~ 30
Pump2Trig ~ 16
Pump2Stop ~ 00
Pump2Adv ~ 05

PumpDwell ~ 3.00
PumpTimers ~ No
Pump1Sync ~ No
PumpSpare ~ 00
PumpCold ~ 00

Water Map
Screen 20

-25 ~ 0
-17 ~ 70
-9 ~ 60
-1 ~ 55
5 ~ 50
11 ~ 50
18 ~ 45
24 ~ 35
31 ~ 30
38 ~ 20
46 ~ 15
60 ~ 12
68 ~ 8
82 ~ 0
99 ~ 0
124 ~ 0

Air_t Map
Screen 21

-25 ~ 0
-17 ~ 8
-9 ~ 6
-1 ~ 5
5 ~ 4
11 ~ 3
18 ~ 3
24 ~ 0
31 ~ 0
38 ~ 0
46 ~ 0
60 ~ 0
68 ~ 0
82 ~ 0
99 ~ 0
124 ~ 0

Crank Map
Screen 22

-25 ~ 72
-17 ~ 72
-9 ~ 72
-1 ~ 67
5 ~ 62
11 ~ 57
18 ~ 50
24 ~ 41
31 ~ 31
38 ~ 26
46 ~ 20
60 ~ 15
68 ~ 5
82 ~ 0
99 ~ 0
124 ~ 0

t*rpm
Screen 23

Idle ~ 00
1000 ~ 00
1500 ~ 00
2000 ~ 00
2500 ~ 00
3000 ~ 00
3500 ~ 00
4000 ~ 00
4500 ~ 00
5000 ~ 00
5500 ~ 00
6000 ~ 00
6500 ~ 00
7000 ~ 00
7500 ~ 00
8000 ~ 00
9000 ~ 00

t*map Map
Screen 24

Idle ~ 00
25 ~ 00
20 ~ 00
15 ~ 00
10 ~ 00
05 ~ 00
00 ~ 00
2psi ~ 00
4psi ~ 00
6psi ~ 00
8psi ~ 00
10psi ~ 00
12psi ~ 00
14psi ~ 00
16psi ~ 00
18 psi ~ 00
20 psi ~ 00

t*air Screen 25
Correction value Is expressed as number of degrees you wish to advance or Retard to the Ignition curve and values Is set at zero.

t*gap
Screen 26

0500 ~ 15
1000 ~ 15
1500 ~ 15
2000 ~ 14
2500 ~ 12
3000 ~ 10
3500 ~ 10
4000 ~ 10
4500 ~ 10
5000 ~ 10
5500 ~ 10
6000 ~ 10
6500 ~ 10
7000 ~ 10
8000 ~ 10

t*Inj Map
Screen 27

0500 ~ 120
1000 ~ 150
1500 ~ 150
2000 ~ 150
2500 ~ 150
3000 ~ 150
3500 ~ 180
4000 ~ 180
4500 ~ 210
5000 ~ 210
5500 ~ 210
6000 ~ 240
6500 ~ 240
7000 ~ 270
8000 ~ 270
9000 ~ 270

t*wat Map Screen 28
0

If its just to get it to start up everything from the basemap except idle and load screens should be ok.
Idle and Load screens should be approx 50 to 60% of the values in the basemap prestage due to your larger primaries.
It will be extremely rich when the secondaies are staged.