premix with microtech?
do i run premix if i get the microtech lt8x? if so wat do i do with the omp then? thanks
eric. |
I would only run premix fuel if you have removed the oil met. pump form your motor.
|
Depends, if you have a mechanical oil metering pump, I would leave it in place. Probably clean it up though, can get some new lines. If it is electrical I would block it all off and premix, I dont think you can run it with the ECU.
|
S4 mechanical OMP will not be affected, however the S5's electrical unit can not be controlled by a Microtech. If you have an S5, remove the OMP, block it off and run premix.
-John |
The microtech has no way of controlling the electric OMP. I just left mine on and unplugged. I run about 1 ounce of premix per gallon of gas. So that would put it at about a 1:128 premix to fuel ratio.
Adam |
I'm premixing as well.
|
I installed an S4 front cover, and mechanical OMP onto my S5 block when I was building it. I knew that I was going to use the LTx8 already, so the project was planned accordingly.
It was a pain in the a** to do the conversion, but its worth it. This way, I dont need to premix out in the cold when winter starts :) -A |
Originally Posted by sunshine
I installed an S4 front cover, and mechanical OMP onto my S5 block when I was building it. I knew that I was going to use the LTx8 already, so the project was planned accordingly.
It was a pain in the a** to do the conversion, but its worth it. This way, I dont need to premix out in the cold when winter starts :) -A |
All times are GMT -5. The time now is 08:55 AM. |
© 2024 MH Sub I, LLC dba Internet Brands