possible problem with my lt-10s
 

had my microtech lt-10s for 5 years now, no problems until recently a few weeks ago car wouldnt start would turn over but not start.

car is a 93 mazda rx7 13b single turbo.

checked for spark, OK
checked checked for loose connections, OK
checked fuel system,OK
checked and tested injectors,OK
last checked compression, OK

put everything back together went to start, it starts:scratch:. working fine the past few weeks went to start it today again same symptoms engine turns over but doesnt start. have no idea what it could be please help.

Thanks,
Lazaro

also spark plugs are dry even after trying to turn over the car for awhile.

prime the injectors and try again also check the tps make sure is calibrated

tried no luck, tps is calibrated.

you sure you got spark?

yes have spark.fuel pump is working, have fuel pressure. have good comp. the only thing that I can notice is the plugs are dry even after cranking several times.:scratch:

what if you spray some starting fluid thru the intake?

havent tried that.

do the leds on the unit light up? green for power, yellow mimics ign output, red for any errors.

checked for errors all ok.

got green and yellow no red?

:scratch::scratch::scratch:

spray some starting fluid , and check your coolant sensor . might be reading wrong