need help lt10 staying on with out ignition switch
i wired up my lt10 pretty sure i did everything right. as soon as i connect the power wire to the battery the computer comes on and primes the pump as if i was on the "on" position. but the thing is that the pink ignition wire isnt connected to a 12v source. thought it was bad ground so i connected the red power wire n black ground directly to the battery and still the same issue much help needed thanks. i hope my computer isnt damaged
|
3 wires for the ecu to turn on.
Red = power black = ground pink = 12v ignition If the ecu is staying on verify the pink wire with a test light. The ignition source your using could possibly be just constant power which won't work. |
Originally Posted by Samito Built
(Post 11544629)
3 wires for the ecu to turn on.
Red = power black = ground pink = 12v ignition If the ecu is staying on verify the pink wire with a test light. The ignition source your using could possibly be just constant power which won't work. |
Sweet ...
|
All times are GMT -5. The time now is 10:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands