My led yellow aint blinking while cranking
 

Hello
Yes my yellow led lamp is not blinking when i try to start the engine......the engine cranks but nothing happens...a few days ago, it started but today icant start the engine! :(

TPS calibration problems???
Does it shine bright yellow with ignition on and the foot OFF the pedal?

Check your cas wiring if i remember correctly.

It´s OK!

Arvika: The microtech unit is LTX12 and the calibration for the TPS is done by the LapTop.

The led aint glowing at all.

I find out that I dont have ignition when I crank the engine....what can the problem be???

if the orange light dosent flash then it is the wiring to the CAS or the CAS is faulty,

Dale

I removed everything and tested every sensor and coil, injector even the CAS and then the loom every thing was ok!...But I found some liquid, I think its oil but it was diffrent viscosity. I dont know where it came from???? and it was in the CAS contact så I took a cleenex and wiped it of and then i put all together and again,
And the engine started again. HolyS--t man lovely sound from the 20B :)

something i found out, about my ECU: if you really, really lightly tap the gas pedal, with ignition to on, you will get the spark plugs to spark. I found this out a long time ago, jus fucking with it, I could actually hear my plugs firing off. Try doing that. Im not sure if my ECU is just wired up all fucked up, or if thats some kinda function? who knows.