MICROTECH X4 HELP!! please!!!
 

If i am using the x4 with the lt10s, do i still need to wire up the ignition part of the lt10s?? and if i do, how???

oh and i am using MSD coils..

and how do i run the vaccume lines from:
1. The wastegate??
2. The Turbo ??
3. The 3 bar map sensor???
4. The Microtech??
5. The boost gauge???

oh and how do i run the tachometer line from the microtech??
and i also need help running my ignition switch line???

Thank You guys!!

1.Bottom port on wastegate needs to go to front cover on turbo(if your turbo dosnt have a nipple, either remove it and tap a fitting in their, or take on of the cooler pipes closest to the turbo and get a fitting welded or taped in their.
2. Answered Above.
3.Answered in the PM i sent you.
4.Judging by this post is your map sensor external? were did you buy it from and why didnt you get the map sensor 3 bar when you ordered it from microtech.
5.Tee the boost guage of the microtech, or if you dont want to do that, go the the turbo side of your engine, look at the inlet manifold and their is a vaccum nipple coming off the side of the inlet manifold right at the flange area. use this hose for your boost guage.