Microtech Question
 

If I Go Stand Alone Will My Stock Guages Still Work And Can I Still Use My Ac?

if you go microtech your boost gauge will not work because it reads off the boost sensor in the car and then feeds down to the ecu and both the boost sensor and ecu will be gone when you are done with the microtech install, you will have to rewire your stock water temp gauge witch is no biggy and yes your a/c will still work. Do a search and there will be posts with people that can answer it in full detail. Also you will have to cut your windshield wiper harness from the motor harness witch is another no biggy.

I Have An 88 Non Turbo With A 89 Motor. Thats Why Im Asking. My Tach Volt Fuel And Oil Pres. Guages Will Still Work Right?

not sure about the n/a's but the tach will, fuel will, oil pressure will and volt should depending on what harness it's on. I don't have volt so i'm not sure but something tells me it's on the drivers side witch should be the harness that doesn't get mest with.

Do I Still Leave The Factory Ecu Pluged In

no