Microtech Lt-10s Into Series 4 Problems
 

Microtech Lt-10s Into Series 4 Problems

--------------------------------------------------------------------------------

hey there, i've just finished putting an lt10s into my australian spec series 4 and am having troubles getting it started. i've got a few mates who have experience in tuning and installing microtechs into rotors but they can't make it around for a few weeks.

i followed the wiring diagram that came with the ECU to the letter. but when i turn the key, i have no cranking RPM. my mate told me that it means the crank angle sensor is wired wrong. i checked it and it was the first time but fixed that and it still won't fire and still won't read rpm.

has anyone had this problem with theirs or does anyone know the wiring colours or a way to use the hand controller to check if the crank angle sensor is wired correctly. i know how to use the controller to check that the injectors and coils are wired up correct.

any help would be greatly appreciated

Lock at the wiring diagram, it work fine.
It's just a beta version, but the wiring for MT-10s is ready. :)

good luck