LTX8S with 4 Bosch Coils and Msd Boxes???
I was wondering which MSD boxes to use. I will be running the LTX8S with the 40r turbo kit and I have a built engine.
Which box should I use my goal is around 500rwhp @ 20psi! -Thanks Edan |
You could use the "MSD-DIS 4" PN 62151
It works perfect with the MicroTech and gives you almost a flawless ignition setup. Remember you will need two boxes. |
I am aware I need two, but do I need two of the same boxes?? Or can I use one Dis-4 cause it is made for 3-4 coil applications???
So I should use 2 MSD DIS 4's??? I see that some people use a MSD6A and then a MSD Dis 2??? Anybody else know what to run??? I am very confused -Edan |
i wouldnt use eanything, the bosch coils and LTX8s will get you over 500rwhp no problems at all
Dale |
Steve @ Aspec recommended that I use the AEM 4 channel ignition... is this a good idea??? Or I could use 4 Crane HI6's....
What do you guys think is best....?? |
the aem will probably work fine,
personally i would not use anything, Dale |
I use 1 MSD DIS 4 HO, but its only on the leading coils. I originally wanted to use it on the trailing as well but apparently the DIS4 wont do this on a rotary.
Im just using the bosch coils but I would like to try some MSD coils. I think you really only need it on the leading anyway. Also as Dale said, you probably dont need it at that boost level anyway. Glenn |
Thanks guys... I am going to buy the AEM system though, just because I don't feel like wiring it in later if I need it. And I am planning to push the boost higher in the future.
-Edan |
All times are GMT -5. The time now is 02:47 PM. |
© 2024 MH Sub I, LLC dba Internet Brands