LTX8 install????
 

I am getting ready to install my LTX8 but is this the only wiring diagram for installation
http://microtechefi.com/microtech-wiring.php#4
I pasted the link showing the diagram for the series 6 I couldnt paste the diagram on here. Is there anything else I should do besides remove entire stock ECU, wiring harness, and coils since I will be using bosch 715 coil packs. My friend is helping me with wiring since I do not know how to solder. Am I missing anything? Experts please help.

http://microtechefi.com/pdf/LTX8MAZDA13BT.pdf
http://microtechefi.com/pdf/LTX8MAZDA13BTS4-5ign.pdf


These are the 2 diagrams you will require to wire the microtech it self.

On aus spec cars its as easy as remove old harness and fit microtech harness but i think with you guys, having left hand drive cars, the wipers may need wiring and a few other things, others will chime on this.

But as for the microtech use the above 2 diagrams.

I actually printed both of these diagrams out at work but just wanted to make sure these 2 were the only wiring diagrams for the LTX8. It looks pretty simple, but as far as the my stock harness should I remove and start cutting wires and connectors or what is the safest way to do it. I hope I dont break any of my connectors.

Have a search through the microtech forum but you should be right to remove the harness, cut plugs and attach them to your microtech harness. But im almost 100% sure you will need to make a new harness for your wipers.(this is detail in another thread i think by aaron cake).