LT12 20B Start-up map?
I am getting an LT12 with an X6 igniter for my 20B Cosmo. I am after tips on how to set-up the start-up map. I am using all stock sensors (CAS, IAT, TPS etc) and I have 6 ID1000 injectors with after market rails etc. Any help would be appreciated.
|
it should start with the map in it.. then the rest is easy
|
thanks for the reply - I was more concerned with setting up the injectors - is there anything I should be aware of running high- impedance injectors?
|
The Microtech doesn't care whether the injectors are high or low impedance.
Which, unfortunately, means that those nice ID injectors you have a kind of a waste of money. The interpolation method of the Microtech is so crude that you'll never be able to tune down to the fine PW that those injectors are capable of. And since you can't enter individual injector latency and other information, you won't be able to trim each injector as it should be. Of course if this is just a drag car it really doesn't matter. On a street car, it's going to be hard to get a smooth and economical tune. |
Thanks alot for the info.
Given that I haven't been able to drive my car since July, I am just looking forward to being able to take it out for a spin. :icon_tup: |
Originally Posted by berty
(Post 10846375)
Thanks alot for the info.
Given that I haven't been able to drive my car since July, I am just looking forward to being able to take it out for a spin. :icon_tup: |
Originally Posted by stezhead54
(Post 10911006)
did you ever get it running?
I should have my first start-up in about two weeks. :nod: |
All times are GMT -5. The time now is 07:42 AM. |
© 2024 MH Sub I, LLC dba Internet Brands