LT10C fuel pressure sensor
 

So I want read/datalog fuel pressure from the micro is there anyway to conect a 0-5V fuel pressure sensor to the ecu? Anything besides buying the fuel/oil pressure kit from themselves? Thanks

Yes, you can. There's an addition 6 pin connector on the LT10C ECU which allows for oil and fuel pressure sensor inputs (see their website for wiring reference).

I've used cheap generic 150 PSI eBay sensors and they work fine. Make sure the LT10C set to either 150 or 250 PSI setting in its configuration depending on which sensor you go with.

Wish i knew this before placing my order! Live and earn.

hey guys, hope you guys are still around to help.
I just picked up some microtech sensors my mate had laying around with the wiring. But i'm abit confused.....
There are six wires all up, but 2 seem to be can hi and can low, so there is 4 wires left but each sensor need 3 wires?
If anyone knows what wire is what the help would be appreciated.
blue wire?
white wire?
grey wire?
black wire?
cheers