LT-10S wiring to Stock FC coils and ignitor help
 

Ok so i followed the diagram for the wiring to the Stock coils, i dont have any of the harness plugs that the stock coils plug into normally, does anyone have a wiring diagram or a Picture of how toi wire the microtech lt10 to stock ignitors? without the stock hardness plugs plugged in, or how wire the harness plug, its the last thing i gotta do to get the car running

lt10 with x4 box just strip the igniters and use (4) trailing coils which is called "direct fire"

but if you have the older lt10 with out the x4 box then you need to wire them as wasted spark like factory. The tan wires need to be 12v switch on leading and trailing. Then you have 3 wires coming from the micro tech 2 of them go to trailing and 1 trigger wire goes to leading.

attach is a wiring diagram for this method of wiring!

http://microtechefi.com/download/LT10_13Bstdw.pdf

Oh i forgot to say this is not proframed for the x4 box so im running it on stock ignitors and coils