How to hook up LT-10s Ignition output wires
k ya this sounds dumb kind of, but i don't have sufficient information to hook these 3 wires up. 2 question basically
I. I have no ignition wiring diagrams included with my package. When I emailed Microtech about it, they said to use this http://www.microtechefi.com/pdf/LTX8...3BTS4-5ign.pdf Well now i'm finally starting to prep the MT wirings and shit. And i ran in to this problem. THE WIRES ARE ALL DIFFERENT COLORS!!! This is the pin out diagram that came with my package. http://members.shaw.ca/ahyc84/FC3S/LT1013bpinoutput.JPG It's a little blurry, but the pin colors were added in by hand writing. The hand writing reads as follow Ign Output T2 - Grey\Black Ign Output T1 - Grey\Red L1\L2 output - (no color specified, but the wire should be Grey\Blue as that's the only wire left in the ignition module batch) So the question is, how the hell do i hook this shit up? I know which wire is for what, but how do i wire it up? Which MT wire to which car wire? this leads to the 2nd question II. Do i hook it up directly to the igniter, or the coils? for reference purposes, the difference between coils and igniters http://www.mazdatrix.com/ign-1.htm Thanks guys, sorry for the trouble. |
oh and another thing, i found the CAS diagram to suck too. the one i provided above has the OEM wires as
Green, Red, White, white\black [4way plug] Green, Red, Yellow, Blue the OEM diagrams shows only Green, Red, White, Blue. I can kinda figur it out as the green and red matches, and there's a white before the 4way plug, and a blue right after the plug. |
if you have stock coils, hook it up like this
http://www.microtechusa.com/Download...4-5fuelign.pdf u got the wrong diagram... |
All times are GMT -5. The time now is 03:33 AM. |
© 2024 MH Sub I, LLC dba Internet Brands