HI&Low impedence and MICROTECH
 

can I run HI impedence injectors in primarys,, and low impedence in secondarys position. trying to use for series 6 FD,side feed 850s in primarys, and top feed 1600s incustom secondary rails , but will the MICROTECH drive them properly with out hurting any thing in the electronics. THX Ron

Any questions you have about Microtech look here and post any questions you might have.
http://microtechefi.com/forum/index.php

Just as long as the primaries are the same and the secondary’s are the same.

as long as my primaries are both 14ohm,,, and my secondaries are both 4ohm,, will that work OK. series 6 FD stock manifolds MICROTECH LT8-s THX Ron

yep, that's what I was told.
you could double check at www.microtechefi.com if you like.

THX turbo 80cid, Ron