stickmantijuana |
06-08-12 09:09 PM |
Cooling fan issue
I have Microtech LT16 controlling 20B motor.
Right now, one of the issues is cooling fans not turning on. I narrowed this down to the signal wire going to the cooling fan relay. When I manually ground the relay coil, fans do turn on, but when I connect it to Aux#2 (WHITE/RED) wire which should control the fan relay on LT-16, fan does not turn on. I have continuity of the wire back to the LT16 from the relay.. There's no voltage on the white/red wire. Any suggestions?
|