I have an LT8 in my FD. I'm planning on making some changes with the car somewhere near the end of the year, and I was wondering if the LT8 could be easily swapped into the FC. Are they "programmed" differently for FCs or FDs? Is there a wiring harness available for the FC?

 

the units are not interchangable!

 

Doh. Like no questions asked not interchangeable?

What is it worth used then?

 

Sorry for stealing the thread...
But what kind of supercharger are you planning to use?
I'm at the moment building a Eaton M90 SC 6-port 13B engine for my Sleeper FB!
Probably with a small bridgeport on the secondary housings and using T2 centerplate with bridge or a big streetport.
Microtech LT10 of course.
460 and 680cc injectors.
Building my own lower intake.
RA apex seals.
Hurley corner seals.
Ford 70mm racing Throttlebody.
Have a goal... 320-340hp :-)
Should be ready in the middle of june.

Even if my homepage is in Swedish... There are some pics there!
http://www.rx7.se/83an.html

\Lars in Sweden

 

You can send it back to Aus and have it reconfigured. Ask Dale.

 

As far as I know you still have to have It sent to Austrailia to have It reconfigurated, unless Dale can state otherwise.