A/C, power steering, stock gauges....wire help...
 

Well, the MT is up and running well, but now I need to get everything else working. If anybody can help me out please do. These are the things that I need to rewire now....I'll start digging for the old posts on this stuff, but maybe it would be nice to have how to fix all the wiring in one post. Stuff I need working again...

Windshield Wipers
Air Conditioning
Cruise Control
Stock Boost Gauge
Stock Temp Gauge

Thanks.

This is all covered elsewhere, but I'll give you the brief version.

WW: Cut out of stock harness
AC: Jumper L/W and L/O wires in remaining stock harness
CC: Cut out of stock harness
BG: Run stock pressure sensor to the dash
TG: Depends on year

Brandon
BR7 Racing

boost gauge :D

thanks guys....i apologize for being lazy and not searching for this stuff on my own...

arlite....i think i found the cruise control, windshield wipers, and temp sensor wires....

So I'm jus going to go plug all this stuff back into their respecive places. All these wires run into the two clips located about a foot about the ecu (right before the fire wall. My question is...all the wires that run from these two clips that go back down to the main ECU clips....can I jus cut those wires now?

Pic.....
https://webspace.utexas.edu/spoolup/...s/auxstuff.jpg