MS3Pro Working Fine
 

Been so long I had to rest my pass word.
I know this forum is for discussing issues with the Mega Squirt products. I have been using the Mega Squirt Pro 3 unit in my race car for two seasons and so far from the installation knock on wood (TapTapTap) to the start of my third season all is working well. Race results are that I am all ways in the top 3 with lots of first places. What I like best is the use of the throttle enrichment program and cold start. At the track I block the wheels make sure I am in neutral and just reach in through the passenger side window hit fuel switch, ignition switch and press start button. Varoom it fires up even after sitting for weeks on end. Thank for all the forum support to get me to this point. I hope my good fortune continues. The products works so if you are having difficulties (Which I have) slow down and look at what you are doing. Good luck and happy tuning.

good job. Just like any other ecu it is all in the fine tuning. I am going on 10years using the megasquirt tried every version except the pro. I have ms3 so point upgrading to pro.